Search:

I would love the ability to tune the TDI I just got one and will be selling the main car that I tune. Since I will not be tuning I most likely will sell my HPtuner.

The thing that sucks is tunes...

I think that he was saying to replace the stock FPR with an adjustable one, so the pressure can be upped.

If you are only going to use it for your laptop get a DC-DC converter less load on the car and less loss. With a DC-AC you are actually going AC-DC-AC-DC

You will adjust your VE table in open loop when running without a MAF.

For spark tuning after fueling is delt with you will scan run a histogram for KR. I use a cell count on 0 for KR and use that when reduceing spark if you have any KR reduce spark by 1. Then use a a...

IT has been talked about before in this post http://www.hptuners.com/forum/showthread.php?t=31916 he has a 3100 but the concept is the same.

I'm not sure if it is supported or not but if you do not have the Beta version send a request for it to support.

Just flash with .23 and use that to tune from now on. If you must use .22 for some reason flash with .23 then use .22 to pull the tune off the car.

Post your tune so we can give it a look.

It is my understanding that it will not matter if Stoch it 14.7: or 30:1 for the fuel when the O2 is reading as the O2 sensor is reading +- Lambda.

"Lambda (λ) is the ratio of actual AFR to...

Why did you get rid on the stock ECM?

First thing you need to do is adjust the MAF I would multiple the whole table by 1.1 or 1.05 to increase the table by 10-5%. After that clear the fuel trims with the scanner be going to VCM...

There is plenty you can do to help get up MPGs.

First is adjust your driving technique this can turn a grandprix from 19mpg to 25mpg here is where you can make the bigger improvements if you need...

Look under speedo> speed limiter> speed limiter

Post your tune and a decent scan. What was posted above should be performed on all cars to get the MAF tuned.

You do not need to unlock the 99 vette to copy the table just pull the tune and view it.

Replace the O2 sensor after the cat.

They should go to 0. They are long term trims they learn from the Short term fuel trims and should be given some time to learn after each reset.

Go to the application folder and right click on all files and go to properties set all to compatibility mode to run with win7.

Post the tune so we can see what tables you have access to and what the shift properties are set to.

I would think setting performance shift to something like
1-2 leave everything the way it is...

I would find it very use full to have a feature to place a soft lock on individual cells possible with the option of adding a note to that cell.

This would be use full for tuning the spark tables...

If the tune is stock the tables should be smooth for the most part so it is not needed. You will want to smooth after you do some tuning this will mostly be used in the timing and VE tables. If you...

First we will need to know what car it is?

No links you should just open the scan on your computer then save as a csv and send it to your phone how ever you chose e-mail might be easiest. You could also use something like google docs and open...

Scanning is not a problem with an inverter as the car is running and you are not burning the tune.

You do not want to use any type of inverter with the laptop for applying the tune it does not...