Search:

Type: Posts; User: ???

Search: Search took 0.00 seconds.

  1. probably can't tell much from a pic of the...

    probably can't tell much from a pic of the diagram but the BCM (top right) only picks up the system voltage from fuse 15 and puts that voltage over the serial data line to the ecm. the ecm is what...
  2. on a 08 c6 I tried changing to fitted and enabled...

    on a 08 c6 I tried changing to fitted and enabled and the alt wouldn't charge at all. so I put it back and messed with some some of the voltage values in the boost settings and nothing I did seems to...
  3. anything ever come of this?

    anything ever come of this?
  4. Replies
    8
    Views
    1,232

    interesting. I have a 08 vette that factory seems...

    interesting. I have a 08 vette that factory seems to be set to non fitted. but all the default values match above. it's pretty stock with all the bcm and stuff. wonder why it doesn't control the alt,...
  5. Replies
    149
    Views
    132,164

    all you will really find is to email that lex...

    all you will really find is to email that lex guy. that's about all I ever found about doing the swap. I've been tuning cars since the old prom days to the new ish stuff, so I think I have a bit of...
  6. Replies
    29
    Views
    1,964

    I looked a while back. never found any cfm rating...

    I looked a while back. never found any cfm rating just the watts or something like that. seems like a high powered fan thou. are you trying to control it with the stock 38e ecm? I think I read it...
  7. Replies
    2
    Views
    341

    I've been searching around trying to find kinda...

    I've been searching around trying to find kinda the same info. but I've got the other way around, stock 08 corvette but manual, the flex fuel sensor add is pretty simple it seems, you buy the kit,...
  8. Replies
    9
    Views
    532

    any chance the o2 is getting cold and drifting?...

    any chance the o2 is getting cold and drifting? it's a old obd1 issue that we used to see with 1 wire o2's in headers. maybe the heater in the o2 died?

    just throwing things out
  9. maf seems to be used under the 4k enabled 3.9k disable

    tuning maf only I ran into a bucking at light throttle going down a small grade on the interstate around 2800hz is what it cruises at at 70. but I can feel it at almost any speed and rpm if I try. I...
  10. Replies
    9
    Views
    802

    not with hptuners but I have a 96 tahoe I tried...

    not with hptuners but I have a 96 tahoe I tried one of the cheap China Bluetooth scanners on and it did that. wouldn't connect to the ecm but caused the radio to freak out. don't think it reset the...
  11. Replies
    0
    Views
    282

    add a PID to scanner?

    I know you guys don't support the old 96 Chevy tahoe ecm to edit but the scanner does work, it's just missing the most common needed PID. the one for Camshaft Sensor Retard (CMP Retard) used for GM...
  12. Replies
    157
    Views
    24,792

    it's just a test function, not intended to be...

    it's just a test function, not intended to be driven that way. check to see if the fan circuit is working. since they are brushless and going for cheap on eBay, they might make a nice upgrade for the...
  13. Replies
    157
    Views
    24,792

    quick question, figured here might be easiest...

    quick question, figured here might be easiest since you guys have volts and hptuners. under the scanner side, there's options to send commands. like turn on the cooling fans, and to what %. this...
  14. Replies
    2
    Views
    453

    some doc I was able to find. I did check the c6...

    some doc I was able to find. I did check the c6 output, it's the 128hz but with the fan unpluged the ecm doesn't output anything on the signal wire, so i still don't know what the other options in...
  15. Replies
    2
    Views
    453

    new style ats/cts-v fan pwm control with e38?

    so, I've not found anywhere on the internet that shows this actually working. e38 ecm corvette os sends a pwm to a box which then outputs DC voltage straight to the brushed fan motor to control...
  16. Replies
    157
    Views
    24,792

    just picked up a 14 and might start playing with...

    just picked up a 14 and might start playing with stuff. is there another place you guys are having this discussion? I'd like to follow along
  17. Replies
    11
    Views
    3,353

    did you ever find your stock tune?

    did you ever find your stock tune?
  18. Replies
    179
    Views
    59,172

    I've got a old lm1 and a lc1. I've only ever had...

    I've got a old lm1 and a lc1. I've only ever had one problem with each one. but the same problem haha. if I turn the car off and restart it to quickly, like within a few minutes, like say stopping...
  19. Replies
    179
    Views
    59,172

    so just to make sure I'm understanding the basics...

    so just to make sure I'm understanding the basics here. I see plx wideband under serial channels. so I log that channel in hp but just hook the wideband into a USB port on my laptop and it logs data...
Results 1 to 19 of 19