i have posted tune and that is correct boost goes way up there at half throttle i have a manual gauge to verify running cts stock map sensor
Type: Posts; User: [email protected]
i have posted tune and that is correct boost goes way up there at half throttle i have a manual gauge to verify running cts stock map sensor
sorry for the delay.. it might be boosting past the 2bar map capabilities i have a intake blow off value and exhaust waste gate. my truck is a 04 silverado and if i remember right 2 bar is max for...
stock motor bigger injector 70 mm turbo
if you fast forward to 10.50 in to the drive you will see it goes int to limp mode... any ideas wood help
p0068 p0102 p0103
i forgot to switch it back that is not the one i use
also maf is disconnected
and when does boost over 5 psi it goes in reduce power mode and disables throtle
brand new build 6.0 stage 1 turbo cam was tuned sd because of boost now we have took the turbo off and running motor with the turbo cam which is better
does a stage one turbo cam have to be degreed in
ok it is a stock 6.0 twin turbo going to run about 8 -10 psi of boost I have a 04 map sensor off of a 06 sc cadi stock injector off a 2011 fuel flex truck 42lbs delfi with the map running I idles...
map sn its off of a 06 cadi
I have the advance dvd from calib success im wait on I wide band to come in..i as hoping that someone could give me some pointers
im wanting sd I seen the o2 reading im checkin that know
there my vcm
when it idles its rich in sd mode it its so rich it wont idle
this is what i changed it to
I just change the injector data when I go to sd does not idle
it is 04 6.0 twin turbo with delfi fuel flex injectors
my truck is a fuel flex it should have bigger injectors.....could you build me a tune I been messin with it for three weeks and give me a suggestion for injectors
with a 2 bar os and a 2 bar sensor from an 06 cadi supercharged the truck idles perfect
04 2500 6.0 stock with a twin turbo boosting 8 psi
can I send you my tune to look at
My question is using a mass air flow on this setup do I need to do the two bar map sensor in spending two credits for the two bar operating system
My question is using a mass air flow on this setup do I need to do the two bar map sensor in spending two credits for the two bar operating system