I appreciate the tip Xjas, and I too have been able to pull codes (like on my brothers '01 Ram 5.2). However, when connected to the VW, it says "no ecu found". My assumption is Planethax has...
Type: Posts; User: strokendiesel002
I appreciate the tip Xjas, and I too have been able to pull codes (like on my brothers '01 Ram 5.2). However, when connected to the VW, it says "no ecu found". My assumption is Planethax has...
OK, thank you sir, and as previously stated, I am not displeased in the slightest with what I've been able to do with it on my vehicle that it supports.
planethax - thank-you.
@ Bill... I hope you're not being condescending with the later part of your answer... I have scanned my Chevy and a Dodge and it worked just fine... my intent was not to...
I tried a search and emailed support, but figured I'd see if anyone on here has some answers.
I have a 2003 VW Passat and I want to find out why my CEL is illuminated. Ross-Tech gives the option...
Since I have the AFE MP and stage 2 intake, along with exhaust... do I need to modify my MAF table? If so, suggestions?
I read that those trucks with the LBZ MP should use the LBZ tables. I...
Holy Cow!
I'm emailing you the spreadsheet that I used... I was just informed that it's too large to upload...:doh:
well done sir! I wouldn't have an issue with an initial puff, but I want to get it to clear up. It's driving me nuts that I can't get it to clear up, it's hazing anywhere past 1/2 throttle, and I...
The rig is in Sturgis now. I was unable to remove 1 of the EGR Bolts... the nut started to round off. I will be deleting it all together come this winter, so I didn't want to screw it up too badly...
Well, Wednesdays I work 14-15 hrs, but when I got home I cleaned the MAF last night and then made a futile attempt to remove EGR Bolts. I oiled them and let the truck run for 20 min or so. I'll...
Andrew, thank-you for all the direction and help. I'll block the EGR and clean the MAF, then give an update including tune, config and log
The airfilter has less than 5k on it- its the AFE Yellow one, the exhaust is also AFE downpipe back with a muffler, no cat. it doesn't billow smoke, just a slight haze with stock tune and intake/...
I believe the underboost code was thrown because of my errors in the tune I wrote- I had copy/ pasted the low baro tables into the medium and high, ending in unplanned overfueling- but I could be...
whew, I was getting worried that I had said something ignorant(or too ignorant)! I have not cleaned my MAF sensor, I'll do that tonight. It did throw an underboost code (I don't recall the Pcode)...
Did I say something wrong?
well here is my current tune, config and log... I put it back to stock and I'm still blowing smoke under heavy acceleration, but there was a definate lack in power comparitively speaking. This tune...
I'd like to say thanks for all the awesome info available on this forum! I've been playing with my '05 LLY for 2 weeks now (well, it was hauling 14k last week and I didn't have access to it). I was...
any progress or luck Van?
DieselPlace and DuramaxForums have alot of info regarding you're inquiry. Check out this thread - http://www.duramaxforum.com/forum/07-5-2010-lmm-duramax-powertrain/133921-heat-problems-towing.html
Sorry to dig up an old thread, but I figured it's better than starting a new one :) I'm a noob so please bear with me. I've purchased HP but won't get it till later this week. I was reading some...
Hello! Jimmy from Wisconsin, I've been lurking for some time now, and this is a great resource. Thanks and kudos to all who've contributed!
I was informed that this set-up will work with the HPT:
http://aeroforcetech.com/products_sensors_egt.html
I sure hope it does because I'm ordering it lol
would you use the gauge to connect to the interface cable going this route?
Awesome find! Thanks for sharing!