On the license part yes. It is on my old car i sold back in 2018. New cam trans all that stuff retune it. About a 3 weeks ago went to make a little change on it and it ask for me to license it. SD...
Type: Posts; User: c.u
On the license part yes. It is on my old car i sold back in 2018. New cam trans all that stuff retune it. About a 3 weeks ago went to make a little change on it and it ask for me to license it. SD...
http://www.hptuners.com/forum/showthread.php?61634-Permanent-DTCs-and-VCM-Scanner&highlight=dtcs
05 GTO and what DSteck listed.
The 05 E40 had a bug in it from Gm. HP put the MAF patch in to fix it. In 06 GM fixed it, So no need for it after that.
You can change the units with out updating. Open the table,Left click in the top left corner see screen shot. Make sure that you use the same G/SEC when logging in the main table. Just to add 8.5...
For a one bar map you need to set it back to stock in the file. Plus set your D-Airflow back up. You will have to click on the thumbnails a few times to see the full view.
This? http://www.hptuners.com/forum/showthread.php?t=9552
Get with DSteck he sells a kit. For this to work you need a real sensor,repin the ECM, set DTC's and stoich. Dave will send that info with the kit.
So its a stock cal with PE and COT changed. Looks like thats all thay did. NICE.
It's a long shot,But try a write entire with the stock file. I have seen a few recover from this.
Ragin,try adding some to the cranking fuel table. See if helps.
Look this over. http://gastiresoil.com/showthread.php?t=3269
Set this table to 4.1 g/cyl, shown in red. See if it help's. You may have to click left on the thumbnails three times to get full view of it.:doh:
This is a 07. It has the E38 ECM.:)
https://docs.zoho.com/sheet/published.do?rid=b0tmj5bc52bf6c3744000abfb0ada1138e387
How much boost are you running? For SD it needs the DTC's set like this. Do you still have the cats on it? Do not log any MAF pids at this time.
What MAP sensor do you have?
I was playing on words. What he posted log fuel trim cell,So i would look to EVAP purge or DI. If you do a search on EVAP purge go to page three some good info there. But it looks like you Know about...
Dave is this a purging disorder.:D
To test the HPT Pro,May help might not.http://www.hptuners.com/forum/showthread.php?t=23343
The ECM ignores fuel trims at WOT or openloop fueling. If the trim is + it can be add to Pe or openloop EQ thats about it. When you posted it looked like you had the wideband piped in. You still can...
The histogram will not work. Need the wideband data working for that. Look this over and see if it is something you can...
See if you have it.
No tune to look at. Look for this in your tune.:p
Now you have the correct injector data,You will need to start over with a stock ve table. When you disable Pe and Be you are tuning for Idle and part throttle only. At this point you will need to...