Search:

And hopefully a dyno run soon...

I took your advice and got rid of a bunch of pids and scanned it again on a pretty long drive with several WOT pulls and everything looks great now. My MAF is still maxing out at around 6200 rpm...

144299
Would someone please look at my log file at time 6:55.844 and look where the MAP starts to drop first at around 6600 rpm and then the MAF starts dropping. Throttle position still shows WOT....

Is it possible to write a different OS to E40 that would be compatable to 24239927? Or would it be a truck file only?
Just grasping at straws

114261

thank you!

Any help at all is greatly appreciated. E40 ecm hooked to t42 tcm in swap. Can't get it to pickup speedo no matter what I do. I can go into vcm scanner and see output rpm on transmission side. I'm at...

846328463484635

Ok thank you for recommendations on wide band. I ordered one today. Also changed injector flow rate to 42lbs to match the stock ls3 injectors that was used. Not sure how much more can be done until I...

I looked on Amazon and Ebay. Would you please advise on buying a decent wideband on a budget. Just don't want to buy something that's junk...

I'll add them and log it again tomorrow if it's not raining. Thank you

Also it is my understanding that the fuel injectors used in the L96 were 50lbs injectors and the LS3 injectors that I'm using are 42lbs. If I changed the injector flow rate vs pressure to a stock LS3...

Please take a look at this data log file and advise if it looks safe. This is my first tune. Worked on it until street manners are pretty good in my opinion. I don't have a wide band. I'm thinking...

Honestly no. Not yet... I'm reading all that I can on the forum and comparing files with similar mods. I'm interested and want to learn as much as I can. It's gratifying to me that I got it to run....

Could some please look my tune and tell me if it's totally out to lunch or if it's because of some mismatched components on engine. It's a L96 with LS3 intake and injectors. e38. LS3 MAP and a 2012...