Yes i have AEM 30-0300 X-Series Wideband Gauge
I will check the timing tables, My injector part number (12613412) flow rate 42lb/hr at 43.5 psi , I adjust my base fuel regulator at 43 psi
Type: Posts; User: Muhsen
Yes i have AEM 30-0300 X-Series Wideband Gauge
I will check the timing tables, My injector part number (12613412) flow rate 42lb/hr at 43.5 psi , I adjust my base fuel regulator at 43 psi
Anyone can help please
Hello everyone, I know more about tuning NA cars, but in BOOST tuning I know little, I've done a lot of research in other topics and the things that I found and know I will put the differences...
Hello, i have a procharge and now i'm building a new block (Je pistons, manly rods, bearings and arp stud kit)
The question is can my stock ls3 heads and stock cam can handle the boost and the...
After decreasing the TPS voltage to 0.92, and close the hole in throttle body little bit, then i edti my idle rpm (Base Setpoint) from 1100 to 850, then idle airflow (Base running Airflow) I...
The nissan manual transmission
The engine is GM 2001 6.0 iron block with 6.2 heads, on Nissan patrol safary Body and gear.
The problem is that I paid for Tune for my town garage (600$, and he says that is the problem from either fuel pump or injectors, i already change it and the problem still, i will try now to get the...
but when i plugged my friends PCM, there is no problem with the car and the duty cycle never drops under heavy load so i think i have no problem with the voltage :pray:
Hello everyone, i have an iron 6.0 Block with 6.2 heads, with 2001 PCM sierra 1500 (P01), 36lb Injectors the part number is (12594512), with Walbro 450lph and fuel regulator pressure (return fuel...
Hi guys, I just replaced my fuel injectors to bigger size, I bought it from my friend, but the problem is that i dont have the injector data, i tried to download the stock tune from Tune Repository...