Well just an update. I ended re locating my batteries to the bed. They were grounded to the frame. So I ended running a ground cable from the primary battery to the block and all is well so far. ...
Type: Posts; User: fctry286
Well just an update. I ended re locating my batteries to the bed. They were grounded to the frame. So I ended running a ground cable from the primary battery to the block and all is well so far. ...
MAF is hooked up, but SD tune only. Truck throws no codes. If I put a non 2 Bae OS in it. It will run longer maybe a day or 2. But will still randomly shut. And now that I'm thinking about it. ...
Yes. It set to 60. Pump was running. And most odd. Which I forgot to save the log. While driving the MAP dropped to zero fuel pump stayed on the whole time. But the truck just shut off.
So, I have a 2011 sierra. Dart 427, 142lb injectors, 90mm turbo etc,, running the 2bar OS. For what ever reason the truck will just shut off. at idle or while driving, the MAP seems to drop off and...
Anyone have any issues trying to data log? I can not get the VCM scanner to log at all. It just acts like it's freezing. I also can't find any of the channels to log for this 2018 X3. I've tried...
I've been trying different things for a little while now. But vcm will not start scanning no matter what I do. It will connect to the jeep but will not read anything. I have no idea whats up.
I just tried reflashing my jeep tonight and it went right through no problem. Lol. I have no idea. But I did just notice I can not get vcm scanner to work on it
no battery charger, battery was g2g. nothing else plugged in the obd2 port. I even went as far as running a hard line Ethernet cable to my computer in case the WiFi was acting up. i did all the...
Bill@HPTuners or Someone please help.
I'm still having issues. Been trying to flash this jeep for 2 hours now. It will not load. Gets about %50 done and gives me a failed to start error
I ended up getting everything figured out. I was having an issue with the BETA software. not sure what the issue was but HP support is working on it.
95328<
well so here is the deal. Not really sure. but it will get about 80% done flashing then give me the Failed Start Error. I actually had it go to about 90% then fail and the jeep actually started and...
just as the title states, does anyone have a stock read on 2001 jeep cherokee 4.0.
Tried loading a tune onto my 2001 jeep cherokee and it got about half way through and gave me Failed To Start error. what is this? now my jeep wont start.
I am looking for an experienced 6l80e tuner. I have a 2011 1500 sierra with a 418ls3 full race engine with boost. I'm looking at about 800rwhp on low boost. I would really like someone to go over...
I just bought a license and my controller is not re syncing properly. its not giving me the license i just purchased.
i Tried up to 12.5 and it picked up detonation.
When i pulled it at 12.5 it lost 20hp so i added it back
Ive been messing with my buddies 2017 zl1, car has 5,000miles on it bone stock. made 525rwhp on a dynopac running 91 octane.
I was trying to squeeze some more out of it, not much success. i was...
yea I thought so, didnt help.
I have to get the stumbling off idle fixed. its fat just not sure what table that is to correct it.
Ok ill try that.. what would cause the car to not make power while holding the brake? Doesnt even rev
Im pulling my hair out. the car runs and drives great. I don't get any surging or anything. I just cant get the car to start without giving it a little pedal, then its a little rough and starts...
how do I achieve flames out of the exhaust while on the 2 step?
cant get the scan to load up. ill try again later.
On the way home today I notice some wierd VE spikes not sure what would cause that. I am running maf only, I did tune the low side VE tables.
and for what ever reason whenever I do a 4th gear roll...