Well I gave the COT disable a try and to no avail. I even zeroed out the enrichment tables for COT just as a precaution and now it seems to run worst if anything. Hopefully I can snag a fresh data...
Type: Posts; User: Mr. Church
Well I gave the COT disable a try and to no avail. I even zeroed out the enrichment tables for COT just as a precaution and now it seems to run worst if anything. Hopefully I can snag a fresh data...
Our setup is running an external Walbro 255 pump and C5 Vette filter) regulator. At idle and part throttle it runs around 68psi, but wide open it's dead nuts at 60, so I just used the stock injector...
Thanks for the reply, I will give that a shot next!
Hi guys, I'm working on an LQ4 that I swapped into a friend's 87 K10 with a TH400. The engine has stock 30lb 8.1 injectors, a BTR Stage 2 V2 truck cam and their LS6 springs. I've had an bunch of...
Map reads right at 100kPa with the engine off and the key on. We are nearly sea level so the MAP reading sounds right. We've traced the harness and haven't found any burnt/frayed wires and both fuses...
A friend of mine just recently swapped his tore up 4.8 from his truck and replaced it with a 5.3. I licensed his truck so I could flash in a 5.3 tune. He has a straight piped exhaust, factory cats,...