Hey guys don't stress.
I think I have it sorted. Did a write entire on the T43 with a 24243170 operating system and bingo. Originally was a 24239353.
I wish someone posted this years ago.
Type: Posts; User: AaronM
Hey guys don't stress.
I think I have it sorted. Did a write entire on the T43 with a 24243170 operating system and bingo. Originally was a 24239353.
I wish someone posted this years ago.
9401394014
Hi mate I have attached the log file and Cal. Both engine and trans were from the same vehicle. They are now being used in a conversion minus the factory shifter and BCM.
Hi Julian.
I have a conversion doing the same thing.
Did you end up fixing it?
Cheers
I was wondering if anyone could help out with the issue of no 1-2 shift when the selector is in 2nd.
The scanned shows the shift lever position correctly but it just will not shift. It will however...
Had the exact same problem. Not sure on the fix yet.
I'm sure this is an easy one but how do you remove the ETC torque limit under a stall condition. Only happens with the brake on. When you press the throttle nothing happens until you release the...
I thought someone would have had this problem for sure. What I am planning to do is put the stock Cal back in, modify it in EFI Live and download, re read the cal in HP and then modify with the...
I have a 2012 E38 L77 403cu with a Harrop FDFI 2300. When I start the engine from cold (20 celcius) it has a stumble just after starting. From what I can tell in the log it commands 13:1 AFR just...
I have been building these transmissions now for a while and have a few out there with over 500rwkw. The ones that get damaged are those with around 350rwkw. They suffer from breaking the 4-5-6...