I have a stock one but manual car :/
Type: Posts; User: patrick4588
I have a stock one but manual car :/
bump
also looks like im getting 7-8* of timing pulled out. so it appears it pulls based on manifold temp, not inlet temp
maybe it is, different set of config channels.
throttle position sae 84%
throttle position 99%
pedal position 99%
Here is log from just now. only seeing low 80% throttle position. any idea why or how i fix this?
2017 z06
15% pulley
intake
cat delete
x pipe
408+F1R
E85 car
on logs today im seeing b1 pulling fuel and b2 adding fuel. usually about a 7% variance between them. Relatively New Build. If i have/had a vacuum leak, would that affect both banks, not just one?...
guess i got it all perfect haha
02 Z06, factory pcm
408/Procharged/6sp manual
So during tuning im maxing out cyl air mass. I understand i need to scale everything to resolve this and continue tuning. I modified IFR by 50%,...
3.3 bar installed. worked great. tune still trash and needs a lot work but here was the first cruise around neighborhood with map installed.
how would i adjust the linear and offset to make it read 100kpa with engine off? i have the generic #s to key in for the 3bar
to me it looks like my map sensor is dead? nothing ever changes on it. just stays same.
So for last couple days i have been tinkering with this thing trying to get it to do really anything if you had seen my other threads. Well i got it to halfway idle decent and attempted to drive...
injectors data changed and cylinder volume changed. i basically made 3 maps with same corrections (1bar, 2 bar, 3 bar). Using the linear and offset of each. My hope was that if selected correct one,...
My tuner is only a few miles away, id like to just get some out of boost driving ability so i can take it over there without a tow.
Also, what steps would i need to take to go speed density only?...
Having issues getting my c5 z06 to idle properly. Got some FIC injectors, plugged in data from FIC. It will crank but idles poorly. Im unsure which map sensor is on car and looks like only way to...
dyno is only about 5 miles away so I really just need to make it there lol. staying out of boost, just normal cruise.
return style, dual Bosch 044
58psi base pressure
9:1 compression 408 with...
Anyone here offer base maps? I need one for 02 z06 with 408 and F1R Procharger.
ordered. thanks
purchased a 02 z06 that is Procharged. right now it barely idles, isn't drivable, tune is not even close. tried reading the file, but looks like previous tuner locked the tune. is there a way to...
I don?t have meth. Whenever they get a good DI upgrade where PI isn?t necessary ill go 100% e85 and a bigger sc
If it ever stops raining ill get a chance too. On like 7th day in a row and next 5 forecasted rain too. Sigh
I get some of this too, cant stand it. I did post my tune in my thread
I’m really not seeing bad temps. You can see my iat in that log. Only 2 gears but no movement
I add a qt of boostane