Search:

Type: Posts; User: JonezN

Search: Search took 0.00 seconds.

  1. Replies
    3
    Views
    1,300

    https://forum.hptuners.com/attachment.php?attachme...

    https://forum.hptuners.com/attachment.php?attachmentid=21209&d=1259561317
  2. Replies
    13
    Views
    2,949

    Thought I would update with what I found. Number...

    Thought I would update with what I found. Number 8 piston head cracked. Looks like the detonation did more than I had thought. But from the looks of the heads and the pistons there was no new signs...
  3. Replies
    9
    Views
    2,129

    instead of increasing RPM try increasing your...

    instead of increasing RPM try increasing your idle airflow (base idle airflow in the airflow tab under idle). My cam liked nothing lower than 12 when I first started it after my cam swap
  4. Replies
    9
    Views
    2,129

    This might help you get a start...

    This might help you get a start
    https://forum.hptuners.com/showthread.php?36318-Idle-Tuning-How-To-amp-Guide-(w-pictures)
  5. Replies
    13
    Views
    2,949

    Decided not to open the front cover after...

    Decided not to open the front cover after discussing on here. Dropped the transmission and pulled the flexplate. Looks like the holes the bolts go through are a bit ovaled so maybe there was play...
  6. Replies
    13
    Views
    2,949

    Ok I was under the impression that the cam...

    Ok I was under the impression that the cam reluctor influenced ignition timing more. Im going to check over all the mechanical stuff this weekend.
  7. Replies
    13
    Views
    2,949

    The cam gear is the cam reluctor that the cam...

    The cam gear is the cam reluctor that the cam sensor reads which is used by the PCM with the crank sensor to determine the ignition timing. So if my cam is off one tooth and I believe the gear has 44...
  8. Replies
    13
    Views
    2,949

    Definitely want to check my crank cam timing now...

    Definitely want to check my crank cam timing now because if the cam is off a tooth that would throw off the time of for the reluctor on the cam gear. I will update what I find after I get the cover...
  9. Replies
    13
    Views
    2,949

    Engine doesn’t have a timing pointer. I have...

    Engine doesn’t have a timing pointer. I have removed the heads completely a week or so ago which is how I found out that the sound was not a lifter but pre ignition because of damage to the piston...
  10. Replies
    13
    Views
    2,949

    So I tried lowering the timing a bit around idle...

    So I tried lowering the timing a bit around idle and it helped some with the noise but it was still there a bit at idle. Also tried advancing it a bit and the sound increased a bit at idle and was...
  11. This could help too...

    This could help too https://www.aacorvette.com/injectordatahp.html
  12. Found this...not sure if it will help...

    Found this...not sure if it will help
    https://www.corvetteforum.com/forums/attachments/c6-scan-and-tune/47677279d1311612235-hp-tuners-72-lb-injector-question-scaling-injectors.pdf
  13. Replies
    13
    Views
    2,949

    Forgot to mention the 3200 stall

    Forgot to mention the 3200 stall
  14. Replies
    13
    Views
    2,949

    Big Cam Pre Igniting My World

    Have a 2006 Silverado 4.8 that had a lifter going out. Replaced cam with a BTR Stage 4 Truck Cam Intake/Exhaust 0.553", 109* LSA, also installed long tube headers. After getting everything back...
Results 1 to 14 of 14