Search:

Type: Posts; User: yaqoubalmounes

Page 1 of 2 1 2

Search: Search took 0.00 seconds.

  1. Thanks Sultan for the reply. no I didnt have any...

    Thanks Sultan for the reply.
    no I didnt have any boost gauge, and I dont think the scanner have the ability to log boost because the engine does not have a map sensor. please correct me if wrong.
  2. Thanks for replying decipha, So what is the...

    Thanks for replying decipha,

    So what is the way to log the timing regarding to engine load. I need to know where in the boardline knock table the timing is used.
  3. 2008 Mustang Gt with roush S/C airload only 1.0 at wot???

    I am tuning 2008 mustang gt with roush s/c, its suppose to make 5psi of boost. when datalogging on the dyno, the air load is not going above 1.0. does that mean the supercharger is not making any...
  4. Replies
    1
    Views
    72

    Anyone have an idea?

    Anyone have an idea?
  5. Replies
    7
    Views
    179

    Have you identify the pcm to vin #?

    Have you identify the pcm to vin #?
  6. Replies
    7
    Views
    196

    Check injectors dc maybe you running out of fuel...

    Check injectors dc maybe you running out of fuel especially with e85
  7. Replies
    2
    Views
    187

    Disable truncation in the transmission torque...

    Disable truncation in the transmission torque management. Rise driver demand 20% in 365 and 571 pedal position. Increase the ipc torque maximum, max gross, max torque wot, lspi reduction, schedule...
  8. Hopefully I understood you question well. Fuel...

    Hopefully I understood you question well. Fuel pressure at idle ~250psi goes to 2200psi wot
  9. Replies
    3
    Views
    176

    Can you attach the file here?

    Can you attach the file here?
  10. Replies
    3
    Views
    81

    It not like mustangs, We dont have mafs. I...

    It not like mustangs, We dont have mafs. I believe fuel should be added in the speed density but dont know haw to adjust these tables
  11. Replies
    1
    Views
    72

    Water/Methanol tune SHO

    I just bought aem w/m kit and will install it in my SHO with catless downpipes and 3 bar map sensor. I am not sure about the way to tune the ignition spark. Can I depend on the iat correction table...
  12. Replies
    2
    Views
    191

    you may get throttle blade closure due to comb...

    you may get throttle blade closure due to comb stab limit
  13. Post your tune file to see what can be changed....

    Post your tune file to see what can be changed. Easy way log the torque source raise it in the tune
  14. Rev limiter in park/nuetral 4000rpm!!!

    I am trying to remove the rev limter in Park/ Neutral but it do not go above 4000rpm and then raise very slowly. I raised the neutral cutoff in the DFCO tap to 5800. I also disabled the Fuel cut...
  15. Thanks evan

    Thanks evan
  16. Open nissan file without connecting to the vehicle??

    Is there a way to open nissan file without connecting to vehicle? I would like to check z350/370 files but it doesn?t allow me.
    Thanks
  17. Can you post tune file, stock tune and the...

    Can you post tune file, stock tune and the logging file so we know what cause the throttle closing?
  18. Replies
    3
    Views
    332

    The torque in the indicated engine torque are in...

    The torque in the indicated engine torque are in the high 500-600 lbft in the last row. Do I still need to make the changes where I just get 370 lbft at most in the logging? How would that benifit?...
  19. Replies
    3
    Views
    332

    Engine Indicated Torque & Inverse

    I have tuned few coyote engine with bolts on and never need to change the indicated engine torque and the inverse tables as its not needed unless heavily modified such as force induction. What about...
  20. Replies
    0
    Views
    296

    Nissan Maxima

    I am wondering what can be done to tune nissan maxima with exhaust system (CVT). I came from ford and chevy tuning world and this is my first nissan car to tune. How does the ignition timing tables...
  21. 2016 Taurus 2.0 ecoboost supported?

    I want to check if the +2016 Taurus 2.0 ecoboost is supported. It's not listed the vehicle supported list. Does anyone know?
    Thanks
  22. Replies
    1
    Views
    368

    Try to raise the limits of the LSPI reduction in...

    Try to raise the limits of the LSPI reduction in Torque Management> General > LSPI Reduction > FMEM
  23. Replies
    3
    Views
    365

    Would changing the OSS modifier from 1.2 to 1.0...

    Would changing the OSS modifier from 1.2 to 1.0 would limint the torque as well as the boost?
  24. Replies
    3
    Views
    365

    2017 SHO Controlling Boost HELP!

    I am tuning my Taurus SHO and facing a problem to control the boost. I am attaching a scanned file of a pull in 3rd-5th gear. I found that the maximum boost get higher in higher gear. In 3rd gear,...
  25. Replies
    1
    Views
    414

    Could be the trans torque management holding...

    Could be the trans torque management holding boost down.
Results 1 to 25 of 47
Page 1 of 2 1 2