I was plug in to the car and started the scan with only a couple PID's. It went thru the normal "gathering vehicle data". I stopped the scan and then i tried to add PID's. Is there a different method?
Type: Posts; User: RealQuick
I was plug in to the car and started the scan with only a couple PID's. It went thru the normal "gathering vehicle data". I stopped the scan and then i tried to add PID's. Is there a different method?
So I started getting my scanner ready for the GTO (I already tuned/scanned by 800+rwhp Camaro).
I start adding PID's that I want to scan and a bunch are not there (cant find them even when I...
big help! Many thanks!
Thank you so much! All set now!
So I downloaded this latest version (I had 2.24) and there seems to be a lot less features in the new one (less inputs I can modify). For example, I have no Dynamic airflow tab anymore, so I am not...
Yup, the 15.3 was before the trims were enabled. I turned the trims on and it started pulling the AFR down by starting to add 3% fuel (pulling toward 14.8 AFR)... Close enough for me! Thanks again.
Well, WB now reads 15.3 at idle, then turn stft's on and they are ~+3, so it appears to be what the problem was. So WB reads lean, and now the trims are adding fuel! Thanks for the responses!
Update, I may have an exhaust leak before the WB (it would explain why the WB shows lean but the NB O2's upstream are showing rich). The slip fit off road pipe (that my WB is in) slip fits on the...
Just for clarification... the WB O2 is on the driver's side in an off road pipe.
Thanks for the response!
I could have an exhaust leak. I'll check tonight... I am also going to pull the spark plugs tonight and take a peak at them.
I leaned out my ve tables to see off over fueling tricked my wb, but it showed really lean (~17 afr), and the stft's was adding like 5-6% fuel to pull the AFR to 16.3 where it stabilized (commanded...
Hey folks,
Been tuning my 2010 ss m6 with hptuners, and it is pretty cool. Having an issue as of late that I cant figure out.
Mods are Ported LS3 heads, cam (235/231 6xx/6xx 115lsa), LT's, no...
Yes, the 3d graphs is only 2d lines for me.
One thing I noticed is that the VE graph ends up being a few triangulated lines (and not a graph). Ill have to figure out why.
you sir... are awesome. Thanks for helping guys like me out.
Jon
Ayone know where there is a step by step guide on how to use this tool?
Is there a step by step guide on how to use?