Search:

Type: Posts; User: orrwhat

Page 1 of 3 1 2 3

Search: Search took 0.00 seconds.

  1. Might make certain the intercooler is not...

    Might make certain the intercooler is not coincidentally leaking assuming there are no vacuum leaks.
  2. Want to add a ethanol voltage input to PCM 20 Redeye

    Is there a place in the PCM on a 20 Redeye to add an auxiliary 5-volt input from an ethanol sensor? I was nice on the older Z06 to just have a sensor that plugged in and turn it on.
  3. Replies
    0
    Views
    702

    2021 GT500 Tune File Partially Supported

    I am trying to pull a tune file from a GT500 and the PCM has to be manually selected.
    Once the file is pulled I get a partially supported message. The car is tuned from a reputable shop.
  4. Replies
    1
    Views
    718

    Here is my stock file.

    Here is my stock file.
  5. I just compared it to my stock sensor and it...

    I just compared it to my stock sensor and it matches the same.
    Thank you for the suggestion though!
  6. Im at 3,500 feet elevation. The MAP is the stock...

    Im at 3,500 feet elevation. The MAP is the stock LT4 sensor.
  7. 2016 Corvette Z06 poor drive ability ( cam headers, 2300)

    Hello guys. I had a lifter noise on my car so I installed camshaft, lifters, on my Magnuson 2300 C7.
    I could not get in touch with Crawford for some reason and the tuner I used basically said hes...
  8. Replies
    1
    Views
    742

    You might run some BG44K fuel injection cleaner...

    You might run some BG44K fuel injection cleaner through it. the GDI injectors get clogged rather quickly from carbon deposits.
  9. I have had very good results with Crawford Racing.

    I have had very good results with Crawford Racing.
  10. Replies
    5
    Views
    1,452

    Would the TMAP sensor cause issues with engine...

    Would the TMAP sensor cause issues with engine temp?
    Also, the dealer ship paid a local speed shop to retune the car and this is the file I pulled off. I dont think they even made any changes to the...
  11. Replies
    5
    Views
    1,452

    Thanks for the feedback guys! The general manager...

    Thanks for the feedback guys! The general manager is going to send the car to me to look it over. I offered to have it street tuned through Wendger Performance for better drivability.
    The first time...
  12. Replies
    5
    Views
    1,452

    2020 GT Edelbrock (overheating issue)

    Hello. I am trying to help a local dealership figure out a 2020 GT with a Edelbrock 2650. A person bought it new and had the blower installed from a Ford dealer before he took delivery from another...
  13. Replies
    12
    Views
    4,013

    I uploaded a stock one in repository a good while...

    I uploaded a stock one in repository a good while back.
  14. Replies
    1
    Views
    848

    Not sure if this is much help but here is my...

    Not sure if this is much help but here is my stock 2016 A8 Z06 file.
  15. Replies
    9
    Views
    3,001

    Is it feasible to turn off TM for testing and if...

    Is it feasible to turn off TM for testing and if so what do I do with it to turn it off?
  16. Replies
    9
    Views
    3,001

    I know the TQ MGT pulls when traction is going...

    I know the TQ MGT pulls when traction is going off.
    It is most likely belt slip. I put the shortest belt on their I could squeeze on it. I had to put the belt in a pan of boiling water to stretch...
  17. Replies
    9
    Views
    3,001

    I have also clamped the bypass valve closed and...

    I have also clamped the bypass valve closed and still does the same thing.
  18. Replies
    9
    Views
    3,001

    Edelbrock 2300 boost is crazy

    99814

    Can someone possibly point me in the right direction? I have tried different pullies, and new tensioner to see if the boost will hold steady. The boost gets goofy around 52 to 54k rpm on...
  19. Replies
    6
    Views
    2,293

    Thanks Cliff! I mostly just wanted to see what...

    Thanks Cliff! I mostly just wanted to see what all they do not change. I know they don't change too much at all and pretty fat on fueling.
  20. Replies
    6
    Views
    2,293

    [QUOTE=clifftrail;596428]Hi all, New to the...

    [QUOTE=clifftrail;596428]Hi all,

    New to the forum and HPTuners so look forward to absorbing some knowledge.

    I have a 2015 Corvette with a Stage 1 Edelbrock E-force S/C. It has the stock...
  21. Thread: Stock Z06

    by orrwhat
    Replies
    0
    Views
    852

    Stock Z06

    Hello. I am about to install a Edelbrock E Force on my 16 Z06. I want to try tune it myself and I am sure I am not logging the right pids. This is in stock form and looks like a lot of spark knock...
  22. If I start on my own tuning, do I start with MAF,...

    If I start on my own tuning, do I start with MAF, reduce timing, then work around VE tables?
  23. Does anyone have a Edelbrock supplied tune for 2016 Z06 for starter tune

    Im getting a used Eforce for my 16Z06 and need to put off dyno tuning until I get headers and a lower. I just want to pay for a one time dyno. I know Edelbrock tunes need help but Id like to play...
  24. Ok thanks the input guys! So is the MAF table...

    Ok thanks the input guys!
    So is the MAF table the one that adjust fueling? I have a AEM with OBD pass through and can log AFR.
  25. 16 Z06 Just curious what all is typically adjusted for headers only

    94073
    Hello. I am just curious what is typically changed on a long tube header only tune. I have been looking at as many videos I can find. I would like to figure out how to slowly tune each mod as...
Results 1 to 25 of 56
Page 1 of 3 1 2 3