Ok I figured out the throttle part. It goes wot. However there is still that half a second delay before rpms climb. I will post a log.
Type: Posts; User: confused
Ok I figured out the throttle part. It goes wot. However there is still that half a second delay before rpms climb. I will post a log.
I have an a8 and when I am on the 2 step the throttle is not opening all the way until I get off of brake. Has anyone found a way for the throttle to stay open with foot on the brake?
I wish hp tuners was capable of vin swaps without the vin/os problem.
So I?m having issues changing my motor swap to my vin. My question is will I be able to buy efi live to change the vin and still be able to tune with hptuners or will hptuners not work due to a...
ok now I have a perfect idle 14.3-14.9. Now its time to do some road tuning.
there was no leaks but it is idling good now just really rich.
The o2 sensor problem I believe is an exhaust leak I'm going to fix that today. I will also check for vaccum leaks thanks for the replies.
swapped MAP sensors same thing. Must be my cam.
Ok ive got the car to idle. AFR's are 11-13 at idle. I have changed everything I can think of with no change. Here is my last log with the current tune. any advise is appreciated. my map at idle is...
ya thats what im afraid of doing but I think I am finally close to a decent idle but its RICH as hell.
Has anyone ever figured these out? Everything I have read seems like it ends with the OP selling them lol. Just want to know if I'm wasting my time or I should keep at it.
Ya I didn't know what was a normal reading or if the mods are effecting it. Cool let me know what you find thank you.
Ok. I will be giving it a try when I get off work. Also my car is throwing a p0180 for the map sensor it reads 89 kpa at idle (as much of an idle as I can get anyway lol.
Ok will do thank you.
Im learning alot of good tips now by just reading through stuff on here instead of searching specifics.
Hello guys I feel like im going in circles just trying to input injector data. I have the data but have no idea how to input anything other than the flow rate and the minimum PW. Ive searched and...