Search:

Type: Posts; User: anniversaryss

Page 1 of 20 1 2 3 4

Search: Search took 0.01 seconds.

  1. Replies
    9
    Views
    82

    Edit > navigation > exhaust > gas recirculation ...

    Edit > navigation > exhaust > gas recirculation > general > egr enable
  2. Replies
    9
    Views
    82

    Try edit go to parmater search or somthing like...

    Try edit go to parmater search or somthing like that. Type in EGR. depending if its in the OS youll find the enable/disable. Make sure its enabled
  3. Yeah no. I already knew this information i just...

    Yeah no. I already knew this information i just had to re confirm i was correct. As a test check the boxes put to "no error report" and run the monitor test after. See if they say ready. Not a ton of...
  4. How does it effect driveability?

    How does it effect driveability?
  5. No problem. Im trying to learn as much as i can...

    No problem. Im trying to learn as much as i can and help out as much as i can.
  6. Replies
    6
    Views
    149

    From what i read it jumps back and forth. When it...

    From what i read it jumps back and forth. When it detects knock it uses the low..
  7. After doing some reading you most def need to...

    After doing some reading you most def need to have the SES enabled box checked on any emissions related code you have set to "no error report" in order to force ready the code.
  8. I think , but dont we quote me, that any item...

    I think , but dont we quote me, that any item deleted like the rear O2s still need to have the SES enable box checked.

    Either way if youre having trouble with certain things not passing i hear...
  9. Replies
    6
    Views
    149

    Mine are all 0 out as well

    Mine are all 0 out as well
  10. Replies
    6
    Views
    224

    My humbled apologies. That was a neat trick. ...

    My humbled apologies. That was a neat trick.
    They removed that fucnction from the main tables.
    HPT also admitted they are removing a lot of the emissions switches and noone could find it.
    I...
  11. Replies
    6
    Views
    224

    If using software version 4.4 your not gonna find...

    If using software version 4.4 your not gonna find it
  12. Replies
    4
    Views
    171

    Just replace MAP with cylinder airmass. Right...

    Just replace MAP with cylinder airmass. Right click on the timing table in editor and copy the units. Then paste it in the scanner area.

    Log cylinder airmass
  13. what specs are your cam and what are your idle...

    what specs are your cam and what are your idle pulsewidths?


    Also what map sensor are you running?
  14. https://forum.hptuners.com/showthread.php?49363-LT...

    https://forum.hptuners.com/showthread.php?49363-LT1-24X-411-PCM-conversion-all-of-us-please-step-inside



    Reference
  15. I cannot look at the logs at the moment without ...

    I cannot look at the logs at the moment without my laptop and i will not guarantee that this is your solution, but from my personal experience with 0411 24x swaps and a few other people that ive...
  16. Yes run closed looop it sounds like your wideband...

    Yes run closed looop it sounds like your wideband is on thre fritz.
    Funny thinking about it. I have a friend same wideband. Does somthing similar
  17. Replies
    3
    Views
    112

    Alright guys i got my answer. Just confusion on...

    Alright guys i got my answer. Just confusion on my part
  18. Replies
    3
    Views
    112

    Ah i understand. I was under the impression it...

    Ah i understand. I was under the impression it had to be a stock unmodified file.

    When you really just need a file that was not enhanced yet
  19. Replies
    3
    Views
    112

    P01 enhanced OS

    Not sure if this is a simple question but here we go.

    When doing enhanced OS did hpt change how they do this?

    The HPT instructions say use stock or existing file.

    So the latter part...
  20. For referenced always use the 0kpa table Or 400...

    For referenced always use the 0kpa table
    Or 400 for delta
  21. This is common in speed density open loop. The...

    This is common in speed density open loop. The IAT gets heat soaked and the pcm adjusts.

    You can try two things under airflow > cylinder charge you could disable it or put 1 across the whole...
  22. Just adding to this subject. Anyone using the f...

    Just adding to this subject. Anyone using the f body settings for knock and not ever logging knock do a few things
    1 sensor
    All DTC are on
    Under knock sensor the "vs rpm Vs cyl"
    Seemed to be...
  23. Replies
    40
    Views
    806

    Boost. No the short pulse limit is the one that...

    Boost. No the short pulse limit is the one that you said is 2.492
    The pulse adders you have to copy off the data i gave you
  24. Replies
    5
    Views
    249

    Yes there is better combustion occurring since...

    Yes there is better combustion occurring since your not losing itn
  25. Replies
    5
    Views
    249

    Id make another post but injection timing is...

    Id make another post but injection timing is taboo or people just dont know enough.
    On a positive note car no longer has the low throttle issues of falling flat in its face anymore
Results 1 to 25 of 476
Page 1 of 20 1 2 3 4