Try this link https://www.dropbox.com/sh/r4h7sobf565t2dm/AADa6kOb9t3b06pXMdUs8pHsa?dl=0
It will show you how and will show you how to set up the offset.
Good luck.
Type: Posts; User: Skip
Try this link https://www.dropbox.com/sh/r4h7sobf565t2dm/AADa6kOb9t3b06pXMdUs8pHsa?dl=0
It will show you how and will show you how to set up the offset.
Good luck.
Not enough information to help.
Have you created a user defined PID?
Have you created a histogram for the PID?
If yes How did you set the above up?
I just hooked the yellow wire analog out 1(0V-7.35 and 5V=22.39) (single with no ground) to the first pin on the MPVI. Starting scaning and was close to MTX-L gage reading. Had to offset (-.2) and...
Just thought I would start this thread for anybody going to the Oct. 2-9-event in Gulf Port Mississippi a place to let other know they are going. Would be a good time for some of us to meet and also...
ok,
if you are have a problem let me know.
I tried to open the file i sent and it opened with no problem.
The file was sent on 9-8-11
Let me know.
Dan: have not heard from you. How are you...
New to this myself,
Also got booted for under 11.49 with no roll cage. Not going to put a 5 point in my car!!!
Main reason to Purchase HP Tuner was to be able to race on the weekends and also start...
98tadriver,
found your file#3 in another thread
Surprising how close two different tunes are so close. Some difference but not a lot. Would like to discuss the differences if you would like to...
That is a big improvement. I droped .5 off my ET also with only the troque and the help of the M/T Street raidals. What tires are you running? with a 1.52 60 ft. you are leaving hard! How does the...
had the same problem with my C5 after rebuild. Before rebuild i installed a 2800 stall converter. The hunting did not start then, only after rebuild.
My tuner reduced the problem, not stoped...
Dan,
Do you think you will gain much by increasing the stall on your torque.
I'm running a FTI 2800 on my C5 and have a best 60ft. 0f 1.60.
What kind of HP is your vette putting out?
I have pull...
Hi Pete,
Don't know if you have found the information you are looking for but just came across you thread.
Have a 01 vette running 10.60 at 130 MPH also and did the same thing to avoid installing a...
Well I'm not sure.
My house and Corvettes are in Baton Rouge Louisiana and when I am there, three weeks at a time, I spend it going to the Drag Strips around the area; working on my cars and going...
It might be in your PC settings. Go to Control panel; Go to display; click on adjust resolution.
Hi all,
My name is Skip
As a lot of you I am new to this site but have been reading a lot of the threads with great interest.
Just a little about myself. I’m not as young as most of you and...