Search:

Type: Posts; User: Haans249

Search: Search took 0.00 seconds.

  1. Thank you so much for some feedback here! I...

    Thank you so much for some feedback here! I wasn't sure how high I should take the virtual torque tables and just tried to guestimate where they should be based on the dyno. I will give this a try...
  2. Anybody have any input?

    Anybody have any input?
  3. Replies
    4
    Views
    483

    I just suddenly started having this exact issue...

    I just suddenly started having this exact issue as well....
  4. Hello All, Providing some updates here. At...

    Hello All,

    Providing some updates here. At the end, I am in need of some additional assistance!

    1) EXTREMELY LEAN Cold Starts
    After some more investigation in the calibration, I found a table...
  5. So, I just went through a bit of an experiment...

    So, I just went through a bit of an experiment with the scaling here. I decided to just try a really high number of columns and rows in setting up the VVE table and to my surprise, I was able to add...
  6. So, I think there might actually be something to...

    So, I think there might actually be something to this thought. I used excel to re-run the scales and get even spacing between 550 to 6900 rpms (rpm stepping at ~212 compared to my previous 250rpm)...
  7. I am continuing to look through my tune and...

    I am continuing to look through my tune and brainstorming ideas to dial in the VVE table in a more efficient manner. The way I setup the columns and rows for the VVE is I switched from the stock...
  8. This is helpful. 1) sounds like I shouldnt...

    This is helpful.

    1) sounds like I shouldnt worry about this for now. Once I get MAF updated and car back into CL mode, this will solve itself?

    2) yea I think you might be right on the zoning....
  9. Cammed 2016 Camaro Re-working "Tuner's" tune - LONG POST

    Hello All,

    First post here on the HP Tuners side (used EFILive for a long time on Gen 3). I had my vehicle tuned by a professional well-known tuner after a bunch of performance upgrades (232/240...
  10. Replies
    68
    Views
    4,990

    So, it seems that anytime a new throttle body is...

    So, it seems that anytime a new throttle body is swapped out from stock, this should be the first procedure completed.

    Even better, I wonder if idle tuning is most effectively achieved by doing...
Results 1 to 10 of 10