Search:

Type: Posts; User: * _ *

Page 1 of 16 1 2 3 4

Search: Search took 0.00 seconds.

  1. Replies
    3
    Views
    534

    i dont have much interest tuning out side of the...

    i dont have much interest tuning out side of the big 3, so it might be best to just keep with the current product that I have.

    Thanks!
  2. Replies
    3
    Views
    534

    MPVI vs MPVI2/MPVI2+

    I have the MPVI & would like to know if there are any major advantages/disadvantages in obtaining the MPVI2/MPVI2+ setup?

    My vehicles are all under the year range of 2014 & I would like to expand...
  3. Replies
    20
    Views
    14,978

    Doing an update did not resolve the issue with...

    Doing an update did not resolve the issue with the 08 & 10 colorado cruise control after a tire size correction was made.
  4. Replies
    2
    Views
    1,418

    intersting work around. I have lost cruise...

    intersting work around. I have lost cruise control after correcting for the tire size with the 2010 & 2008 colorado. Battery disconnecting did not resolve the lost cruise control function & I would...
  5. HPT does not support BCM tuning. I don't know...

    HPT does not support BCM tuning. I don't know what to suggest in order to execute BCM tuning for GM vehicles as a garage hobbyist.
  6. Replies
    3
    Views
    1,917

    Is there a possibility to have the trucks 2.9L...

    Is there a possibility to have the trucks 2.9L PCM benched flashed using Tech2 software to install an OEM 5.3L Colorado baseline file prior to using HP tuners software? Can the folks at HPT perform...
  7. Replies
    3
    Views
    1,742

    Can you elaborate with pictures on how you went...

    Can you elaborate with pictures on how you went about that?
  8. I'm aware it's an older thread, but ​what was the...

    I'm aware it's an older thread, but ​what was the outcome from this? I'm looking at the LS3 to swap in to a 2.9 AR5 rwd equipped truck. I'll use the trans adapter for retaining the AR5. Just not...
  9. Replies
    3
    Views
    1,917

    Colorado harness & tune questions for LS

    Having a hard time finding anything that is for a 2010 to 2012 Colorado Canyon regarding LS swap support.


    Has anyone successfully done a 2010-2012 Colorado or Canyon inline with RWD 5 speed to...
  10. Replies
    5
    Views
    2,196

    tried finding a MDi to use for BCM programming...

    tried finding a MDi to use for BCM programming but have not found a device that supports the 2008 thru 2012 colorado's.

    Most support 2007 LD trucks, but in the specs, it never lists that...
  11. Replies
    2
    Views
    1,890

    if i set vats patch 1 and vats patch 2 to...

    if i set vats patch 1 and vats patch 2 to disabled, will that bypass the signal being cut by the system & then allow the truck to start? What about starter fault checks, do i need to set that to...
  12. You are sure there are no vacuum leaks? Injector...

    You are sure there are no vacuum leaks? Injector seals good?
  13. Look in the trans section for rpm & gear...

    Look in the trans section for rpm & gear limiters. I think some software development tossed that in the tcm area... might need to add in credits for that too...
  14. Replies
    5
    Views
    2,196

    It has always been a capability sought after.

    It has always been a capability sought after.
  15. Replies
    3
    Views
    3,980

    Not sure which fan still. Few trips to the yard...

    Not sure which fan still. Few trips to the yard and all had clutch style
  16. Replies
    3
    Views
    1,742

    Intake Manifold Runner Control Valve 2.4L Srt4

    Was there ever a successful deletion of the dodge caliber srt4 Intake Manifold Runner Control Valve?
    I do not see where exactly in HPT where it can be addressed.
    Is it possible to tune it out of...
  17. Replies
    3
    Views
    3,980

    Which trailblazer had the e-fan? I only...

    Which trailblazer had the e-fan? I only recollect those being equipped with clutch style.
    I looked up the vendor's for my application, but they either are no longer supporting the 2008's or they...
  18. Replies
    3
    Views
    3,980

    2008 2.9 Colorado Fan

    I'm looking at converting from the clutch fan over to electric fan, but I am unsure which selection in the system file selection on which to choose for it to be controlled by the PCM for T-stat & a/c...
  19. Thread: Upgrade Concern

    by * _ *
    Replies
    6
    Views
    1,133

    This! How can i be reassured that what i can...

    This!

    How can i be reassured that what i can do with the software I'm currently using will not be disabled, hindered, be more cumbersome, and whatever else by a later version software?
  20. Replies
    1
    Views
    681

    atomic calibration?

    will HPT have in the near future a feature built in the software to self-calibrate the pcm? I know it wouldn't be the end all be all tune, but if the engine build does not have a stock file to use,...
  21. Thread: 2006 G35x

    by * _ *
    Replies
    2
    Views
    949

    2006 G35x

    Will HPT scanner be capable in resetting all DTC's regarding a 06 G35x Sedan? A friend is asking for my help to R&R the powertrain, but I am uncertain if the HPT software supports resetting any...
  22. Replies
    3
    Views
    764

    yes

    yes
  23. Any sockets in the ALDL pushed back? Are the HPT...

    Any sockets in the ALDL pushed back? Are the HPT connector pins good?
  24. Thread: 2009 VIPER issue

    by * _ *
    Replies
    6
    Views
    1,908

    ^ im not 100% sure what your tables are showing...

    ^ im not 100% sure what your tables are showing regarding terminology, but is that similar to setting the max torq - torque limit vs. rpm values all to the highest # to each rpm table listed for that...
  25. Replies
    1
    Views
    2,137

    The trans being used would be from a 2011...

    The trans being used would be from a 2011 colorado. Not sure if the modules would still be needed going in to the 2008. ??
Results 1 to 25 of 382
Page 1 of 16 1 2 3 4