Just to update. I fixed my problem. It was the ve table that was screwing me up. Since my idle map is 35 the pcm was using the 40 map since I am in olsd and using the secondary ve table. I knew it...
Type: Posts; User: mikeyv
Just to update. I fixed my problem. It was the ve table that was screwing me up. Since my idle map is 35 the pcm was using the 40 map since I am in olsd and using the secondary ve table. I knew it...
c5 2000-Do I leave the p0101,p0102,p0103 codes checked or unchecked? and do you mean to return the maf hz back to stock in the engine diag.? I'm pretty sure I need to put it at zero until I want to...
My commanded afr is 14.7 when this happens and I don't know why but my previous cam was larger than this one and so far was easier to tune. I tuned the last cam the same way as this one-olmaf. I...
yes I have my raf table in check and I can command 14.7 at idle with the vcm controls. Its got to be something in the tune i'm not seeing.
I'm trying to tune ve for now and then move on to maf. I never had this problem with my previous cam which was a lot bigger. Its got to be something in the tune that i'm just not seeing. Anyone...
Thanks for the links but I've tried that already. I wonder if I need to rewrite the whole tune to my car again cause I recently just switched from a 2002 OS back to my 1 Bar Maf. At this point i'm...
Any other suggestions? I cannot for the life of me figure this one out. Its lean just before I hit 0 mph in the same cell that I idle in but as soon as I hit 0 mph it just shoots down to 13.0-13.5....
I thought I set up the tune to ignore the o2 sensors completely. I don't like running closed loop because it doesn't seem to be as consistent as olsd or olmaf. I'm just trying to set up the ve first...
I recently put in a new cam(219/224 .600/.600 115) in my 2000 Camaro SS and I've been re-tuning my ve table to get everything back in check. My issue is my afr at idle. It first read 12.8 so I...
Well the problem is that I tried to log it and see if I noticed anything unusual when it does it but came up with nothing. Maybe i'm not logging the right things. any suggestions on what I should be...
Thanks for the reply but I've already turned those off manually while I was scanning it, and there was no difference, any other ideas? Thanks
I have a 2000 Camaro SS with a 226/230 112 cam and ported stock heads running OLMAF. I've got an idle issue that I've been battling for months now and I just can't figure it out. It only happens when...
Thanks for the response eficalibrator, I wish I could attend one of your classes. Coming to Metro Detroit anytime soon?
I have a 2000 Camaro LS1 running OLMAF and was wondering if I could change the High RPM Disable under Dynamic Airflow from 4000 rpm to below my idle speed without hurting anything. I want to give...
I'm still battling this lean off throttle then rich condition. If I let off the throttle quickly the afr goes up in the 16's-17's. If I slowly let off it isn't as bad, more like high 15's. It only...
DFCO has been disabled for the past year. Any other suggestions?
I've been trying to figure out why I keep getting these lean spikes. I only happens when I let off the gas quickly. If I slowly let off the gas it doesn't seem to do it or at least as bad. I don't...
I've got a newb question. I was going to try and log for duty cycle but I could not find it under the pids, could you point out where I can find it. I thought it would be under the fuel system pids...
I'll post a log and tune as soon as I get back in town. What should be a decent DC%?
I've got ported LS1 heads and a 226/230 .575/.595 112+4 cam and I was told that the stock injectors should be sufficient enough. I just figured that my issue had to do with transient fueling. If I...
How much do I start adjusting it by? Increase or decrease by .010? Or more?
My injectors are stock.
I have a 2000 LS1 Camaro and I'm running OLMAF. I've finally got my ve and maf tables down. The car runs awesome. The next thing I want to accomplish is my transient fuelling issue. When I cruise...
I've got a 2000 Camaro LS1 and the afr is set to 14.62857 but i've noticed that the 2002 Camaro has the afr set to 14.68100. Can I change my afr to 14.68100 and be good or will I have to redo my...
That's what I thought but I don't have any more credits to get another 02 operating system.
I've got a 2000 Camaro SS and I did a write entire to get a 2002 operating system but the 02 OS I downloaded has the 1 Bar SD mode applied and I was wondering if I could "un" apply it because I want...