Search:

I currently have two MPVI Pro registered to my account. Is it possible to transfer all of my existing used and unused credits to a new MPVI2? Is there a Pro version yet? I would like to be able to...

O.K. Did this yesterday. Had to have the Engine Running, Parking Brake Set, Foot on the Brake Pedal, HP Tuners Scanner Open, but not running a scan. Then go to the Tab where you can see CASE...

Watch the YouTube Video I posted above. It's really simple looking to do. And from what I read, make sure you in Metric Mode.

Thanks Everyone.

http://www.youtube.com/watch?v=EVKxAt39ydg

Nobody can help me?

I have used the Search Feature and have only found member complaining about not getting it to work with their Beta Versions.

I have the latest and greatest Full Version of HP Tuners Pro. I need...

I too am the victim of a bad ECU. I have a 2008 TrailBlazer SS running the E67 ECU. A Friend of mine also has an 08 TBSS and said I can have his Stock ECU because he bought a second set with a tune...

Great Info.

I read through these threads, but still do not have my answer. I'm not looking to turn off the codes, I just want to know how to make the truck run its system check.

I recently jump started my 2008 TrailBlazer SS, then went to get my NYS Inspection. The State computer days I have three systems Not Ready in order to pass. I run a Scan and under the DTC Tab I can...

Great Write Up.

Nope, no adjustable dials. I think I'm gunna have to contact AEM one day when I have some free time during business hours.

Thanks For All Of Your Help Thus Far Bill. I Tried What You Said And I Did The "0" Thing To Get It Working. I Can Get It To "0" Out And Work From -30 To 0 InHg, But When I Floor It And Build Boost...

0-5.0 V can't equal 0-50 psi. It is also a vacuum guage. So -35 should be 0 Volts and +30 psi sholuld equal 5.0 volts. If you playback my scan log you can see the Raw Volt on EIO 2, at idle it sits...

This Is All They Give You When You Buy The Guage. A Single Sheet Double Sided Print Sheet. Nothing About Voltage Corresponding To Any Specific Ranges Like My WideBand Came With. Thats My Problem. ...

And When Your Done With Your Emails If You Can Please Help Me Here.
http://www.hptuners.com/forum/showthread.php?t=28861

Does Anyone Have Any Idea Of How I Can Make This Work?
Bill????

Anybody?

I Bought An AEM Digital Wideband Guage And Connected It To EIO 1. Whe I Went to Create A Guage For It I Selected The AEM Wideband Option And It Works Great.

So Then I Went Ahead And Bought The...

You Need To Talk To Matt Over At Tune Time Performance. He Can Do It All.

Tune Time Performance
931 Route 166
Toms River, NJ 08753
(732) 349-7800

Thanks Russ K, That Was The Problem. I Did A "Write Entire" And I Loaded Without A Problem. Started Right Up After That. Thanks A Bunch.

Sorry To Bother You Bill, Didn't Know Youz Were Away...

Suport, Where Are Youz??

I Have This Same Problem Today On My 2008 TBSS. I Emailed Support And Bill And Still Haven't Heard Back At All. I Read The VCM, Made Changes And Tried To Write It. It Failed With And Error Of "VCM...

I Have The Same Setup. I Had It Tuned My Matt At Tune Time Performance In Toms River New Jersey (732) 349-7800. Give Him A Call And He Can Tune You Properly.

Awesome, I Just Decoded My 1979 Trans Am.