Ok thank you!
Type: Posts; User: n_brio
Ok thank you!
I have a 2015 c7 z06 that have motor + trans tune. But i like the trans tune from my old z06 better but that was a 2016. Can i just load the 2016 tune i my 2015?
Or does the motor and trans tune...
So i only need to change open and close like this
88702
Thank you squish72!
Can anyone confirm that its 1 and 2 that is sport and track mode?
Hello
Any one know how to setup this to have the NPP exhaust open all the time in sport and track mode?
88556
Im doing small changes all the time and my logs makes my map strange. Between shifts it goes lean between 105 kpa to 153 kpa making the map make a big jump.
Is PE ramp 2.0 to slow?
72408
what was the max boost your friend had? and what was the hp number?
i did 12* as max timing for now. maby a get greedy in the end of the summer and turn it on more :cool:
schpenxel:
I did use your friends tune and did start from there. Now the car is an animal! still have to tune the timing.
But i do get some knock retard around 4000 rpm at 9* timing. i did not...
schpenxel:
I did use your friends tune and did start from there. Now the car is an animal! still have to tune the timing.
But i do get some knock retard around 400 rpm at 9* timing. i did not...
I run e85 👍ok i will try to add some timing
schpenxel: should i add more ignition in the high octane table during tuning ve or should i modify the IAT Base Spark table during tuning?
Now i see it in the other computer i did not see it in the laptop i have mess with the decimals so i did not see the different.
I did have a torque shaped curve in the beginning (i did copy a aps...
My Setup
2005 c6 m6
TTiX 3" dp
SD tune 2,5 map sensor
bosch motorsport 1435cc @ 4bar
return fuel system dual walbro 450 one turn on in boost
Btr custom turbo cam with spring+
stock bottom...
Im about to tune my car but i wonder if anyone have more data on this injector.
Is Bosch motorsport EV14 1300cc injectors
Statatic flow: 1250cc @ 3bar, 1435cc @ 4bar, 1615cc @ 5bar.
the only...
the injector has part nr 0 280 158 333. Is this the same injector that Deatschwerks sells?
Has anyone tune with Bosch motorsport EV14 1462cc/min @ 3 bar?
What injector data did you use?
I have just dailed in my VE tabel and the car drives awsom and i have started to tune the boost VE
My car is a 2005 corvette c6 with supercharger on e85 2 bar SD OS
forged ls2 cr 10:1
small...
I did find the problem, It was black background in the cells and black text :doh:
Thank you i will try this tomorrow! :D
I have tuned the primary VE table now and it is spot on. Using the histogram with lambda error PID and Primary VE vs RPM vs MAP.
I use custom 2 bar os only SD no maf, car is a 2005 corvette c6...
If i make a log with commanded lambda should i be using the stoich value for alcohol or the double value becaus i have scaled the tune?
What should i set the PE an BE to on e85?
PE 1.176 all over
BE 1.3 and lean out to 1.25 after max tq
or what do you think?
ok thank you all!
This leads to the next question double the stoich for e85 like 2*10=20 or the stoich for gas like 29-30?? :confused: