Thank you fastMopar, I had to put a pin in the idea for a while. I bought an extra pre eagle motor was considering building it, with your info I think I can achieve a good concept of what...
Type: Posts; User: chadillac
Thank you fastMopar, I had to put a pin in the idea for a while. I bought an extra pre eagle motor was considering building it, with your info I think I can achieve a good concept of what...
Goal is to not but a 1200$ standalone tcm for an 8hp tranny swap. Can it be done? Other than disabling Eagle features not found in pre-eagle motors what other obstacles could I encounter while...
mine did something very similar, after i got my wideband working i found the truck was running to lean in the same condition and it would bog sputter and die. slap it in neutral and fired right up....
white1 helped my issue earlier this month with my stage 2 cam, what made the most difference was raising idle tables anything under 800 i set to 800 also i increased total airflow in Airflow >...
log file
my gauge reads great, the scanner on the other hand seems to fluctuate severely110419. it reads as low as 10.05 (.06 Vs) to 16-17 and averages are about 2+ lower than what the gauge itself reads. At...
i resynced the scanner and that helped.
as far as the no start it was tune related no sure what exactly yet but i copied some fields from another 04 ram cam upgrade someone posted in another...
i changed MAP to pressure ratio. no success
hi guys, i've setup and have successfully started to log my AFR gauge into the software. I have transformed the volt input to display for AFR stoich.
BUT, there seems to be a few kinks i've...
sorry for the delay, i did evil things to this last tune attempt, notice the pw at 100+ are double or triple the original value. Also am i disabling the rear O2s correctly and why cant i use OL while...
Thank you white1, it?s the stock throttle body, with that being said I just found that I never reconnected the brake booster vacuum line after I dropped the motor in, maybe it?s related to the...
After completing the rebuild and upgrading the cam in my 5.7 hemi it ran terrible, talked the the guys at summit and they said get a tune on it, of course i had to learn to do it my self since the...