Aaahhhhh. Ok. I'll look into that! thanks. Will let you know what I find.
Type: Posts; User: four_by_nut
Aaahhhhh. Ok. I'll look into that! thanks. Will let you know what I find.
I would have thought that through the N/A range, this wouldn't be any different than stock. I would have thought it would act the same as stock and be at least close. Are you saying that even...
Ok. The change to the DTC didn't solve the problem. And I confirmed it DID set the DTC for P0103. Attached is the tune and a log file where I was just stall torquing it up to just about into...
Ok. I think I'm an idiot. I'll admit it. I messed up setting the DTC P0103 to "MIL on First Error". I had it set to "No Reported Error". Sooooo........I wasn't failing MAF and dropping into SD...
I'm helping a buddy tune an E67 Gen4 ECU that came out of a 2007 Saturn Ion (2.4L Ecotec). It's boosted, up to about 14psi. For refernece, I've successfully tuned my 2007 2.2 ecotec up to about...
I'm trying to help a buddy figure out some issues with his 1.4L out of a 2017 Cruze. But I have a general question about what HP Tuners is showing me for a VVE table. I've included a screen capture...
If you have E85 or E55 around you, you could always run that and tune for it. Because your computer is likely not dual fuel enabled, once you tune it for E85 or E55, you will have to stay that way. ...
Is this happening when in the boost at 6500rpm but not when out of boost? If it's happening in boost but not out of boost I have the following thoughts. If it happening not in boost...then ignore...
Yeeaahhhh....aannnnddd.......what data do you want in the log. There are thousands of parameters to log. Advance? VVE? what data are you looking for? Just "a log" is pretty general and will net...
Buuuuuutttt.......is it seriously being considered?
What log information are you looking for in particular? I am currently working on tuning a turbo charged 2.2 (L61 model) from a Cobalt. I won't have any NA data but could get you turbo charged data...
Is there a plan/date for when it will be available with the MPVI2? It is a shame that it was available with the previous version but for those of us who went with the newer/better version can't have...
Changed that value to 0 in the table and it still won't turn off once it comes on even when the desired goes below 20%. In fact it is sitting at 0% and the fan is still commanded on by the computer...
Thanks cobaltssoverbooster for that response. Maybe I wasn't clear....I'm not having a problem when I turn the vehicle/rig off. I'm not having a problem getting them to come on when I want. I...
I've read all of the posts dating back to 2006 about this topic but I STILL can not seem to get my fans to turn on and off properly (well.....on works....but not off). Attached should be an image of...