Search:

Type: Posts; User: =fast=

Page 1 of 15 1 2 3 4

Search: Search took 0.00 seconds.

  1. What helps to have more airflow at low cruise, vehicle dies. log inside.

    Guys truck was running good after the stall converter installed it gave me a problem where at low speed if I let go the gas it will turn off out of no where.
  2. 12.2 drop 9 rwhp, 12.7 car put down 430

    12.2 drop 9 rwhp, 12.7 car put down 430
  3. Yeap that’s all this car gave, try tuning it...

    Yeap that’s all this car gave, try tuning it rich, lean it a little on the safe side, 4th gear pull, 3rd year pull 430rwhp was the most power it made.
  4. Circle d converter and yes locked.

    Circle d converter and yes locked.
  5. How much power can a turbo cam affect on non boosted motor?

    It?s a 2016 Corvette LT1 with headers, stall converter, and a boost cam later we are going with a procharger kit. Car made 430 RWHP pretty low for me guessing it?s not liking the boost cam?
  6. Replies
    3
    Views
    260

    Ive seen it somewhere or someone post it but...

    Ive seen it somewhere or someone post it but couldn’t remember.:confused:
    So there’s two servers numbers, there’s one for the 8 speed and the other one for the 10 speed? I’m asking because I’ve...
  7. Replies
    3
    Views
    260

    8 speed unlock TCM??

    Guys I been out for a minute, was wondering if we can buy now the TCM unlock or we still have to send our stock one to gerbil it unlock??
  8. What can I do after the solenoid pack swap A6speed.

    Just swap a solenoid pack on my 2009 g8, will write entire my stock trans file work? Or that just work when you change the whole TCM?
  9. How long it takes to swap my mpvi to mpvi2?

    Guys how long will it take to get back a mpvi2 with my licenses change from the mpvi1?
  10. Replies
    4
    Views
    369

    Horsepower around 400-1000, yes would like...

    Horsepower around 400-1000, yes would like something not to expensive to start.
  11. Replies
    4
    Views
    369

    Opinions on Dyno? going towards Dynocom.

    Guys I search around and I seen old threads about Dyno companies.
    I?ve been looking at the Dynocom, What do ya think about the Dynocom??
  12. I’m going to get time and do a log, I will try...

    I’m going to get time and do a log, I will try and make a video see if we can hear the breaking noise.
  13. I’m running the NGK LTR7-IX Iridium, would this...

    I’m running the NGK LTR7-IX Iridium, would this plugs can be gap? I see the tip very sensitive.
  14. At WOT it sounds like it breaking, AFR looks good...

    At WOT it sounds like it breaking, AFR looks good that’s why I’m like lost.
  15. Need help backfiring after bumping it to 13 lbs.

    Truck was running good at WOT I was bumping the boost and after 13lbs at WOT it start like having a backfire and airfuel looks good around 12.0 I don?t know if it wants more leaner. Change spark...
  16. Replies
    1
    Views
    384

    P0011 after cam swap.

    I?m getting the code p0011 after the cam swap, truck it?s running good it?s a stage 1 cam nothing big. But cannot get rid of this code I can?t just delete it right? Since my cam it?s a vvt camshaft....
  17. What I need to make work a 4l80e in my 2010 6 Speed Silverado?

    I?m thinking going with a 4l80e in my 2010 Silverado 6 speed. What will I need?? It?s theres a harness plug and play? Just wondering how I can I tune it or run the tcm. If it?s a lot I?ll just Get me...
  18. It work I haven’t got no REP.

    It work I haven’t got no REP.
  19. Will the VE and IFR work well to half it at .5?

    Will the VE and IFR work well to half it at .5?
  20. I have the code, its P0068.

    I have the code, its P0068.
  21. I got Calculate map max, delta airflow, MAF...

    I got Calculate map max, delta airflow, MAF cylair MAx, raised and Error max map at 100 error min map at 0.
  22. I saw it and I'm pretty sure it was 1514, let me...

    I saw it and I'm pretty sure it was 1514, let me double check.
    Well it was not making it on low boost.
  23. Found a thread where it says to multiply both IFR...

    Found a thread where it says to multiply both IFR and VE by .5 and leave stoich alone. Will this work I'm on e85 that's why I just want to make sure.
  24. Whats the fastest way to keep engine reduce away with boost??

    I raise the boost and around 5,500 rpm it hits and goes into engine reduce power. Its been awhile I tune a boosted vehicle its my personal truck 2006 with 16 lbs with 160 lb injectors. I think I...
  25. Replies
    4
    Views
    921

    Need help reading a 2019 Silverado.

    I?m trying to read but it don?t show me no hardware, I choose the e92 17+ ecm and it don?t let me. I have the 4.0 version.
Results 1 to 25 of 375
Page 1 of 15 1 2 3 4