Possibility: if the VSS reading in the E38 isnt right, the E38 can incorrectly hit the max-speed-allowed limiter ... and will just not allow the engine to go faster. This doesnt raise any codes.
Type: Posts; User: eboch
Possibility: if the VSS reading in the E38 isnt right, the E38 can incorrectly hit the max-speed-allowed limiter ... and will just not allow the engine to go faster. This doesnt raise any codes.
could be the speed VSS isnt reading properly in the E38. The E38 calcs the wrong speed and hits the max-allowed-speed-limiter. I had this problem on an an LS3 swap.
I believe the E38 is actually different depending on whether it came out of a car with an auto or manual trans. If auto, pins 71/72 arent used/operational ...speed comes to the E38 across the gmLAN...
Meatbag; this info seems to be correct. I had to do exactly what you state to get my E38 to read VSS sender signals on the E38 pins 71&72 coming from my termec5speed.
Update;
Got a "new" E38 out of the same year LS3 Corvette ... but this VIN was for a car that came with a manual trans (confirmed VIN with GM). The new E38 has the exact GM PN as my original E38...
I've purchased an ECU with a Corvette LS3 manual-trans factory tune. We'll see how that works out.
I'll post info later.
Cheers
eboch
... yes .... but I dont have a VIN # from a suitable 2008 Corvette LS3 which came equipped with a manual trans ...
BlindSquirrel;
Thanks ... good info (that I didnt know). I'm wondering if this is something the local GM dealership could help me with.
Cheers
eboch
First, you need to find a sample file of the same year/make/model but with a manual trans, and copy the VIN that vehicle used. Use that VIN to program it in SPS, it will pull down a calibration the...
kgraves;
Thanks for this info. Sounds like I cant do this with HPtuners. Under "OS" in HpTuners ... there is a "apply code modification" function .... sounds like this wont do what I need it to...
Thanks everyone ...
Sounds like I need to reflash with the right OS. I started another thread to discuss how to go about doing this.
Cheers
eboch
Hi All;
Hope someone knows about this. In trying to get my DFCO working on an LS3 swap, I seem to have a condition where the E38 doesnt read the VSS inputs (on pins 71 & 72) from my Tremec. [I...
Here is my tune
Hi All;
Struggling with this. This LS3 is a swap into a C2 Corvette. Tranny is a Tremec TKO 600. I'm taking VSS off the trans from the pass side VSS sender (12 pulses per rev). I dont need this...
Dont mean to hijack this thread ... but I have an extended/related question. I'm running an LS3 swap (E38ECU). The engine came out of an automatic corvette and the E38 ECU is from the same car, but...
Hi All;
I have an LS3 with E38 ECU in a C2 Corvette. Using HPTuners scanner, I get no tach reading (engine running of course). The LS3 is out of a '09 Corvette ... which has a factory dash tach...