I found my issue, but not the cause. The fuel pump does not run while cranking. Is this normal for a P01?
The car has the dash, body harness including BCM and underhood harness from a 1999...
Type: Posts; User: yelruhde
I found my issue, but not the cause. The fuel pump does not run while cranking. Is this normal for a P01?
The car has the dash, body harness including BCM and underhood harness from a 1999...
134775
This is the file were the engine would run, but then the issues with the fuse started. The engine did not run well. It was calling for at least 25% more fuel in the fuel trim cells that...
I made these updates and the results are the same. Log & hpt files are attached. The MAF did not set the DTC's, which seemed odd. 134773134773134774
There was one starting attempt without ether....
I am not using a MAF. The 1227730 Gen 1 controller is a MAP system and my setup is using a single plane Holley intake with a 4 barrel Dominator flange style throttle body. A MAF could be added if an...
I have a 406 SBC that was running on a Gen 1 1227730 ECM that is now converted to use P01. It has run with the P01 and was running/starting reliably then the last PCM started popping the bank 1...
Hi, new to HP Tuners, but have been using Tunerpro RT and Moates Autoprom for quite a while now. Recently decided to upgrade the controls on my 67 Firebird to a Gen 3 PCM. I have a 4 tooth crank...