I narrowed it down to the "module" or whatever it is called inside the transmission. I verified all the wiring is correct and the shift linkage is working as intended. This winter I am going to...
Type: Posts; User: Janz99
I narrowed it down to the "module" or whatever it is called inside the transmission. I verified all the wiring is correct and the shift linkage is working as intended. This winter I am going to...
This is the file I used to do my segment swap:
79792
This was taken from the repository when it was still up and functional.
I had some time today to get the truck up on stands and disconnect the shift linkage. Even with the linkage disconnected the PRND indicator doesn't correspond to the correct gear that the trans is...
ScarabEpic22
Here is a log with a few WOT pulls towards the end. There are a couple that I get gun shy on and start letting out early (knowing its going to peg the limiter) but if you scan...
Hi All,
I have a 1968 Chevy C10 with a 5.3L/4l80E swap. I'm using a 2002 0411 PCM and stock harness to control the engine and transmission. The truck has been running for the last few weeks...
Worked like a champ!! Fired right up and everything seems to be working as it should. Here is a log of the startup in case anyone was curious.
The only thing I can see that isn't working...
Here is what I did:
-Using stock PCM tune, segment swapped trans and trans diagnostics with 2001 Silverado file
-Saved file and closed all files
-Open original pcm tune and using compare feature...
I will definitely try this. Is this the "normal" order of operations for a speed density tune? Applying the patch last after all other changes being made?
The truck has a GM IAT wired in, the...
Went out tonight, disconnected the battery (assuming reset the ecu), flashed my last known good tune and it fired back up like usual....... I'm not exactly sure what is going on. Bad flash...
Hey guys, I've been playing with this for the past few days without much success. I have an 0411 PCM with a 5.3L/4L80E swapped into a 68 C10, running a single bar SD OS. I had the truck up and...