Hi, I have a 2013 Ford Mustang v6 from a customer, he had a problem with the old PCM shutting down the throttle so he bought a spare PCM... I paid 4 credits so we can pull the info from the stock...
Type: Posts; User: cdquevedo
Hi, I have a 2013 Ford Mustang v6 from a customer, he had a problem with the old PCM shutting down the throttle so he bought a spare PCM... I paid 4 credits so we can pull the info from the stock...
103424103425
stock TCM file is the one that says 091920 TCM the other is one of the modded files I made with no luck
I put the stock file and works good right away... but it doesn't matter what number I modify, my tcm or my jeep srt doesn't want anything different than the stock file...
Hi everybody, I'm having issues with my tune, doesn't matters if I modify something as simple as the torque limiter or the whole upshift pressures and slip parameters... it's the same unless I put...
Hello! I tuned my engine, it's running great... horsepower is a little bit over 500awhp but the limiting factor now is the transmission, I don't want to mess up my tranny, I need it to shift 500rpm...
I felt it like it should today... but I still have to fine tune the WOT fueling and see if it needs to advance a couple degrees at the PE table...
the throttle at 86.3% is normal? there is a way...
If I feel that is not improving as I work I'll contact you... thanks...
thanks, I'll try that today, I saw the knock too, pulling 5 and 8 degrees... il take a couple degrees and lean it out a little bit...
5th Gear WOT (Super Rich) & Regular driving from work to home...
Hi, I need some advice here, I've been fine tuning the cruising and idling fuel trims, I think I have everything almost figured out with the VE tables, since the NN was a pita to make it work 100%...
What's srt4 injector flow? I think those are not bigger than 46-49lbs/hr stock... how big are the 5.7 injectors?
I'm used to tune Mitsubishis and Subarus and feel like those injectors won't feed...
thanks, let me try with them...
Good afternoon, I've read a lot and I think I understand this table... I recently bought a 2014 Jeep SRT with bolt ons straight from copart, the engine was damaged so I put a new one on it (4500...