Edit: WHAT HE SAID
Type: Posts; User: Nutty Cutty
Edit: WHAT HE SAID
You can right click Copy with Axis in the Primary table and then paste with Axis into Secondary table. It keeps the values in the particular Row/Column as they are from where you copied them.
How did this turn out?
Found it! Awesome thanks
I set the timing tables the same and both match the Low octane stock table. Also the VE table is the stock table plus 10 or 15% I believe. I have disabled LTFT and STFT now and attempted to wire in...
This is now set to stock settings. Unsure why it was set that way. I am the second owner of this "tuned" ecm so those values are from the previous guy. He may of has a large cam and that's how he...
Well I tried ti do as suggested but idle is just as bad but even worse. Must feed throttle to keep alive. swinging from Way lean to rich constantly even in open loop and trims disabled. I'm lost. ...
Curious, There's no 2 bar MAP available in PID Channels...Why would that be? Only SAE and 3 bar. I sure thought I set it up as 2 bar OS
EDIT: Confirmed its set to 3 bar OS
Thank you. I didn't know what to do with the Base running airflow based on the previous comment. Thank you for the tips. I will try this all today.
Im going to check the 02 sensors out to make sure this isn't the issue like this...
I removed the 3bar Map sensor PID from the scanner for this log and left the Intake MAP Sensor SAE PID. I do not see a 2 bar option to add under this system. Afraid if I us the 3 bar it will cause...
Jesus, I don't know why that is like that but I can say it's obvious why she won't run.... You need to start over with new VE table and scale it for 3 bar. You may want to use repository for a...
MAP Data is correct
Fixing these issues right away. Will try to get an updated log this evening and post if I still have issues.
MAP is a 2 Bar MAP Sensor GM *12615136
Hey guys. I am having issues with the idle in my project. I am hoping someone will take a moment and take a look at my log and tune to give me their thoughts...
2004 4.8L STOCK Motor
80 lb/hr...
Thanks Chevy
I figured. When I click on OS nothing shows up thought so I couldn't check it. Thanks for the help.
perfect thanks
I need to know as well. Im learning so all this is somewhat hard to follow.
Still cant find it. IDK wth Im doing wrong
Yeah sorry.90507
yes
When I click on Gain theres only one column in the table. The table is "Impact factor vs Airflow table " and shows variables lb/hr vs Compensator gain . Maybe its different under the P01 from other...
I am trying to add the correct Deka 80lb data and I am at this spot. "Fuel to Wall Transient" I cannot find where I should add this.
Heres the data. It's near the bottom. Anyone know where to...
thanks for the pointers