Also was my thinking above correct with the process I want to take with continuing playing with the VE tables using my afr error?
Type: Posts; User: Daniel196
Also was my thinking above correct with the process I want to take with continuing playing with the VE tables using my afr error?
Thank you sir. Open to any more advice. Going to make some changes and get some logs tomorrow in preparation for the dunes in a week or two.
Hey guys it has been quite a while and I have some new data. My scanner for some reason did not lock my layout and had to start that from scratch but got it all back I believe. I took a short log and...
Also, if I am on the right track and get the AFR within 2-4, will I then go closed loop and start timing? I am also sure I have taken all idle tuning steps, but have yet to get starts without the...
Hey guys it has been quite a while and I have some new data. My scanner for some reason did not lock my layout and had to start that from scratch but got it all back I believe. I took a short log and...
I will be back at it on Monday. I guess once I drive around a bit more and get it all within let's say 5 percent, what is my next step? I want to learn and watch videos in my spare time but some of...
I also apologize the log is not very long but it is difficult since it is in a rock crawler jeep that cant be on road and I have limited space at the moment Want to get things a little closer until I...
Ok so I have made some changes and took this new log with driving around for quite a while. Looks to be lean across the board. Should I simply copy, paste special 50% and smooth or make some more...
With the start up, it does the same thing when warm also. It has to have even just .1% of throttle input to stay running on startup warm or cold.
Also seems to still want to die when put into gear.
I have a fresh build lm7 based engine. I have changed usual parameters for a cam swap but am having issues with starts still and want to know if I am on the right track/ what my next steps are. I...
Also, does anyone have a link for a video or anything with instructions for the 1 bar-SD OS change? I found a youtube video for 2-3 bar, but was not sure if it was the same and do not want to mess it...
Also, the jeep did seem to sometimes not die when changing gears.
Hey so I think changing abuse mode speed to zero may have done the trick! Was not still fully responsive and I changed all MAF DTC to first time. Still had to give throttle to start and had some...
Will do, I thought I had changed abuse mode speed to zero. I will check/change it.
Hey guys, I have a copy of my most recent tune file and data log. The jeep is still not revving up and falling on its face when the jeep is in drive or reverse. Revs up pretty good in park or neutral...
Thank you very much. It was quite odd considering I put it back into park and it revved up right away and was very responsive. I know Dakota Digital makes a sensor of sorts for my th400 to hook up to...
I will check tomorrow. I don't think the motor would have really known that I was in 1st, but under the load it would not rev really at all and would just move at the idle speed.
Hey guys, so I had to move the jeep today and let it warm up and it idled fine and did not die at all when I shifted. Now it would idle and roll the jeep just fine and be ok with a tiny bit of...
I ran the motor up to temperature at idle and then revved up a few times. Seems to fall on its face after giving throttle and a little more laggy revving up until the motor was fully warm. Also...
Can you explain to me which way I would adjust them based on what the wideband is doing?
Can you explain the differences of the previously posted tune and the one you have sent? I reviewed some of the changes in comparing files, but would like to understand the changes.
Ok, I used this file and still needed throttle to get it started, but besides that it seemed to run fairly well. Slight stutter when revving up and it would die if I let the RPM's drop without...
Also, What other changes can be made so the motor will start without giving it throttle? I also have to keep into the pedal for a minute before it will idle on its own, during this time it is...
It is saying unable to open your file with a newer version detected. I have 4.4.4 and it says no available updates for me.
UPDATE: I got it open and written. Still had to use throttle to start...