speed is given from body control module aka wheel speed sensors (abs sensors), cruise control has to have the output shaft speed sensor working correctly, and trans ratios calibrated correctly
Type: Posts; User: joe@kpracing
speed is given from body control module aka wheel speed sensors (abs sensors), cruise control has to have the output shaft speed sensor working correctly, and trans ratios calibrated correctly
I have a jeep with a issue with po129 code and lighting bolt on dash, I have attached file I have tried messing with Baro min, but I have had no good results. Jeep has maggy kit on it, with a 2 bar...
Has anyone tried this method on a supercharged car as of yet? Does the same logic apply?
What are your guys thought on the aftermarket IAT sensor that VMP sells.Looks like a typical Gm IAT sensor. Do we need to re-calibrate the IAT transfer function in the software? I would say yes as it...
something also to note is the torque value is off, max torque of 325ftlbs indicated. I am still fussy on the torque relationship with auto cars, as I know it differs from manual cars.
Jn2
The...
I am having some issue with a hesitation, stumble on tip in in this car. It has ID1300, with Fore return fuel system, ARH long tubes with no cats, and a Circle D 2b converter. It also has stock...
Does this mean that all 8spds prior to 2017 can also be tuned? Just for clarification?
Any info on how the spark is derived? ie what the Flex fuel (Blending vs Ethanol%) is actually blending?
I see some stuff on SCT that is not there on hp tuners, Idle ETC Integral Term closing, and Idle ETC Integral Term opening and the values are very small compared to stock. I am guess It is related to...
Bump for anyone who has tuned a whipple 132mm tb
Anyone with a tune file for the 132 MM Foval throttle body that they would share? 2015 mustang GT. I would be happy with just the Predicted throttle angle, and the Effective Area Only. Or a excel...
How do i get the large files off of my phone and into a device, I have a samsung galaxy phone. It says files are 24gb
Bump for answers
Any updates on this Eric?
Just pump info or soi and eoi too? I have a truck with a Whipple that makes 600 with stock pump. We replaced the injectors and pump with z06 stuff, I tried the copy and paste and the pressure drops...
Anything special need for the lt4 pump swap? Tuning wise? Or is it copy and paste from zo6 file?
Tried disconnecting the battery, and the result stil same. Any one run across this.
Mike
I have been making revisions to that CAL while this was posted.
I did notice this thing has like 52 degrees of spark in some areas, I think that is a little excessive. I smoothed it out and it seemed to reduce my torque management adv. It made 654 on e75 on my...
I am getting huge torque management spikes at part throttle, are causing the car to surge. Mods are headers,no cats,upper pulley, and haltech cold air, and e85.
I have included log file .cfg, and...
Any update on Gen2 software.I know we can read but not write.
Do you know if Snap on or Matco or otc has any offering? to do the throttle relearn?
Any updates on throttle relearn? And what scan tool is required to do the throttle relearn?
bump
Any idea why it stops in the software at .59V. The car obviously sees more airflow than that. And is there going to be a VE table of any sort in the future or is it virtual like GM???