Does anyone have a good Config for scanning the 3.5Eco they could share please?
Type: Posts; User: 03Sierraslt
Does anyone have a good Config for scanning the 3.5Eco they could share please?
I have tried everything I can think of to get this to stop, when starting out basically just as the clutch is completely released it pulls timing way below commanded and STFT go lean. It gives it a...
Anyone?
Why does this happen? This has happened for years and its really annoying. Randomly dropping channels and making the logged info useless????
Any word on this?
That’s what I figured, he is bring his (whatever they are called now ) over to Load a base file.
I am installing a new ECM in a vehicle, the ECM comes from GM with nothing loaded. Can I flash it as is or should have have a friend at a dealership load a base file first?
So your running a 3bar sensor on the 2bar OS?
Bump for updates
Can we revisit this for the P0059 computer?
My spring pressures are 160/440
Mine doesn't always do it, when it doesn't it runs out just fine and all is well. When it does I can feel it lay over from the timing being pulled. I just don't...
I raised the gain from 1.4 to 1.5 and it goes away, just not really sure why its there to begin with.
I have had this issue randomly, it started on my old LQ4 and I made some KR Global gain adjustments (went from .9 to 1.4) and it went away. Now I have a whole new engine and trans and its doing it...
Anything?
Without a doubt.
Do I just email them?
I get that but the REP issue I am speaking off is nothing new and a known problem in this application. This isn't just REP specific it is about the couple codes that kick REP including P1516 when...
It's related to throttlebody only. I would like access to it. Just would be nice to expand the range a bit where the code is enabled due to TPS variance.
Please, maybe?
Just seen this, Thanks TJ Ill give it a look.
I am already running the 80E segment, just trying to determine what I have to do that would allow me to run a FF sensor and have it function properly.
How exactly does the Blend Factor table...
66365
My tune has the flex fuel tables and at this time is set to Disabled naturally but I was told that even thou some have the tables they don't work???? Doesn't really make sense but IDK. Let me see...
TJ, will an 04 P59 that's in my sierra support flex fuel and my 80E segment?
My ls2 throttlebody works fine, but anytime I try to run something larger it goes into rep as soon as it sees the throttlebody blade flutter at wide open.
High rpm, high boost