I agree no way to tune gm stuff without wideband, especially boosted stuff. L83 even worse with boost added. It is frustrating that many new "tuners" come on here not wanting to just pay for a...
Type: Posts; User: Ttmerc
I agree no way to tune gm stuff without wideband, especially boosted stuff. L83 even worse with boost added. It is frustrating that many new "tuners" come on here not wanting to just pay for a...
Yes sir Ryan is helping me also Thank you for your help! Ticket numbers (33736) (33747)
Lost Stolen Mpvi2 with 300 licenses Looked everywhere. Can I buy another device and transfer Licenses to it? What are my options. Thank you
Yes flex is enabled in the 2ss 1le file
Stock engine? Look at the torque management stuff. General tab. Default trans limit etc, max those out see if it changes. Lots of stuff needs to be adjusted in the tune IMO. but try the TM stuff first
Yeah something isnt quite right with the read and right it seems. They said engineering is working on it was the last update. Seems when i modify and flash it doesnt take with the limiter concern....
do you have your mpvi2 plugged in? thats strange. they told me to reread after some update and I had to select the CM2450 to read it it wouldnt recognize it. When I read the file it had another speed...
Must Have the latest Beta to open
Here is a Stock file from a 2015 C63 M156 May have an older model as well if you need it like a 2010
114990
EDIT: Just reread your post. Post the tune. Which map sensor do you have selected in the tune? IE NA-MAP NA-TIAP SC-TIAP Etc. Then the baro and Sensor offsets need to be in correct positions and some...
In my experience with those especially with the DSX Aux pump the plug that plugs into the map sensor inline can go either way. Try flipping it. If the car runs fine with the DSX unplugged thats your...
Post the file
Try this. A/F needs to be on point it will effect the crisp choppyness 114948
No sir
Anyone that can point me in the right direction or possible HPT needing to add some more tables that are hidden and not available to see in the current version? Attached Stock read and a mildly...
Yup Worked great!
For anyone searching the SGM is located behind the cluster on a 2021 3500 6.7 Laramie Cummins. Tried to read file out but got an error when it was done. Trying to get that rectified now through...
Way to go HPT for adding support on the new 6.7! I emailed support last week to see where the smart access cable plug is located on 2021 Ram 3500 6.7. Haven't heard anything back yet. Does the ECU...
I didnt even think the 2018 4runner was supported. Ive been trying to tune my wifes 2020 for months with no support. Cant even find a stock bin file to edit with WinOLS. Care to share the stock file?
Run Switch with relay to the pump on key on or on a switch you can control. Much Easier done many times. Also if its an earlier year separate the cooling systems. Hope that helps
Dedicated Motorsports also makes a Billet Thermostat housing that can run any LS thermostat. Ive had much better results running them than the aftermarket LT.
Post a tune and log
In my opinion from experience in this same boat, the c16 isnt the best fuel for this and shortens life on sensors. Try a mix with Q16. I've also shimmed the high side pump a bit for some added high...
That would be in the Gen 4 forum but here is a layout and channel list. Can also be used for boost but has all the needed trans stuff if applicable
103972103973
Log and tune required. Just 3-4 shift? Is it truly knock? Compare commanded timing to actual. If the "knock" is say 8 degrees but timing is what it should it could be Torque management. Log and tune...