Alrighty, Well thanks for the help. I'm going to poke around and swap some coils and wires around to see if I can't make the miss appear somewhere else and go from there.
Type: Posts; User: jameswis01
Alrighty, Well thanks for the help. I'm going to poke around and swap some coils and wires around to see if I can't make the miss appear somewhere else and go from there.
So I've never had it "tuned". I messed around with stuff just enough to get it running and have slowly tried to get things better over the past year. I'm no tuning expert by any means, but I didn't...
Yes, I saw the log was titled that, but like I said, a lot of the tables just weren't doing anything. I'll upload the short 2 logs I took with it last night.
It doesn't seem like many of the...
I'm trying now, but I'm not seeing man of these fields changing at all, and maybe i should mention this is still a P01 ECU, running a Drive by Cable. And the config file is reading my oil pressure...
I can feel the misfires. It ran fine for around 15k miles with this tune (not great, kind of rich at idle and a little lean for my taste at 14.8afr when running down the road, but the PE seems to...
2000 Silverado with 2002 Tahoe Tune
6.0L gen3
Texas Speed 220R Cam
06 Flex Suburban Injectors
I'm experiencing a misfire on Cylinders 2 & 6 when pulling a slight hill, and ~30% Throttle.
...
I'm not watching decel AFR. I'm watching AFR on acceleration. And my LTFT and Short Terms are showing its PULLING fuel at -7to-10%...
And no, I haven't done much tuning, which is why Im asking...
If it didn't jump above 14.7 a lot, then I couldn't care, but I'd like to get it down a bit. I'm getting times of 15-18afr.
More than anything I'd just really like to know how to adjust this. ...
2000 silverado with 6.0L
Running Rich.
Commanded AFR should never be leaner than 13.5, but constantly runs around 14.8-15.5..
LTFT disabled -> No Change
In VCM Scanner special funtions, if...
Not funny at all. Wasted my entire day trying to solve this issue, and still don't have a fix. How would you like it if someone posted that type of stuff on the day you ran into an issue before a...
Adding FYI, The tune is from a 2002 Tahoe with Flex Fuel.
have a 6.0l (Iron LS2) swapped 2000 Silerado and its running a little lead..
hitting 14.7-15.8 under low acceleration.
I've been trying, but I Can't figure out which perameter I need to change......
Another question, just because I found out yesterday mine isn't working, Does the tune have anything to do with Cruise Control? Could I have disabled that by using a tune designed for ETC/DBW??? If...
Sorry for the delay.. Heres the Tune I'm currently running, and a couple logs...
So this engine started as a LQ9...
It has new ceramic coated flat tops (no valve releif)
243 Heads
Texas Speed...
Sorry. Don't know how to delete thread. Found out bolt does not ground Cam Senor. All done thru plug...
I'm not sure how to add the Wideband into the Datalog... Here is the listing from Amazon.. https://www.amazon.com/gp/product/B01FEH2GNW/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1...
As for...
I have a 6.0 Iron block, built nearly identical to an LS2, but with bigger cam...
It's running lean all the way from startup..
Idle is right around 14.5-14.8..
Light acceleration is pushing...
I'm wondering if the Gen3 CMP uses the metal "hold down" tab, where its bolted to the motor as ground or if it uses one of the pins in the 3 pin connector.. I didn't clean the paint off my block, in...
I haven't messed with the EGR airflow yet either. I'm wondering if I should 0 out that table or leave it with all the stuff in it. I'm guessing I should 0 it out?
And when I put the correct...
I have a GEN3, 2000 Silverado 1500 P01 ECU, With Swapped with a 6.0L LQ9 w/ TSP220R cam and Headers.
I'm running the tune for a 2002 Flex Fuel Tahoe, as I've upgrade with a flex fuel sensor as...
https://www.hptuners.com/my-account/tunerepository/
If you're looking for the stock tune, you can find it at hptuners.com... Login to your HPTuners account. at the upper right, click "welcome"... Then on the left find the button "Tune Repository"...
Are you keeping the DBW or DBC setup?
Don't be rude!!! He said he was new, and so am I... We came here for help, and if you can't be civil when providing it, then just ignore the forum!!!
Chad, I've just done almost the exact build. ...
Also wondering... what exactly does the OS Speed Density patches do? Enhanced vs 2bar?