Search:

Type: Posts; User: leess396

Search: Search took 0.00 seconds.

  1. PCM output voltage 411 PCM red plug wire 50

    Hi can anyone tell me what I should see on the red plug pin#5o vss when turning on the ignition not starting the engine I am trying to sort out a speedometer (electronic) problem the speedo reads...
  2. Test completed. the voltage at wire#50 with...

    Test completed. the voltage at wire#50 with ignition on not running 10.8 --- voltage at pin #50 on pcm with red disconnected is 8.91. I cut wire #50 near pcm to check for possible short and...
  3. Hi thanks i didnt get the flow chart. I will...

    Hi thanks i didnt get the flow chart. I will check as per your last Thanks
  4. HI thanks for the input I get 12.6 volts on vss...

    HI thanks for the input I get 12.6 volts on vss wire stopped and battery voltage is 14.1 volts Any suggestions thanks
  5. Hi yes pin 50 red has voltage without moving

    Hi yes pin 50 red has voltage without moving
  6. 411 pcm on tuned port with 2002 express van tune PROBLEM WITH SPEED OUT

    Hi all I just completed a swap of a 1999 vortec5.7 with distributor and a tuned port system with sequential fuel injection it runs great and no codes. I went to connect an electronic speedo to...
Results 1 to 6 of 6