Depend on the blend of fuel
Type: Posts; User: AJxtcman
Depend on the blend of fuel
Whats your shops #?
I found this on the internet one day looking for ETC parameter information
I will be you a calibration for a 2001 F-body OSID 12202088
If everything fails we will have to run a the older coil pack on the engine
Does that change the VCM ID (ESN)?
I do this all the time.
#1 How do you think that Dual-Flash does it?
#2 It isn't very hard to do.
#3 you can find many companies to do it.
I would use a forum member named N0DIH to do it...
I need to know how the SD OS is attached to the PCM?
I want to try a new build with a new OSID. Does the SD OS tag to the VCM ID?
I can edit the VCM ID, VIN, BCC, and the OSID to match the...
Bill can you resend the last email I got from you? It had an HPT file in it? I need the HPT file
it is more than that.
different IPC/Gauges run on different Hz also.
the calibration has a switch parameter also.
My PC crashed.
I hope this week I will have it back up. I will send you some info then
I did it in a hex-editor.
I got it all figured out and then sent the info in to TunerCat to have John add it.
Contact Bill @ HPT to see if he got it from me.
It hasn't been upgraded to an 0411? and what is the OSID?
This is either Cat Over Temp or Piston Protection. This is a wide-band log. The PCM is commanding the AFR to 10.3 and the wide-band matches.
...
What is the PCM service #?
Cot?
If you want to do it. Then you either need to pull the chip or run a seed and key finding tool on the PCM.
If you pull the chip you can read the seed and key. Then reinstall the chip with out doing...
Today I finished adding the parameters to the "Fuel System Segment" section that you need to setup a 0411 when using it in a hybrid configuration. I don't need to swap in a van segment anymore. The...
I can send you the bin and some other info, but I don't think you are up for it. :secret:
I can set up a system that allow the car to run and drive
I have a program that I was working on for a V6 car PCM. Long story. It would run the 4T80E also, but I don't have any time to work on it.
The Crank reluctor ring is different from 1999 to 2000. The crank sensors are a different type and the location was changed also. The offset in deg is different. In 2006 the cranks were changed again...
Good reading material
Purchase a second ECM
I know nothing about these
21787
21788
21789
P07 vs E67 (I think it was taken some time ago)
http://i224.photobucket.com/albums/dd25/AJxtcman/PCM%20Stuff/PCM%20types/PCM.jpg
P07 Siemens...
That is very funny :slap:
You are screwed!!!!!!!!!!!!!!!!!!!!!!!!!! :banghead:
Well maybe someone with SCT can loan you a hand. :D