Search:

Type: Posts; User: Nigel Pitsch

Page 1 of 2 1 2

Search: Search took 0.00 seconds.

  1. I can share my own exp mine runs a PC makes a max...

    I can share my own exp mine runs a PC makes a max of around 14 psi on 98 ron
    Around 5.5 K up to max rpm 6900 I have about 6 deg total adv WOT
    KNK sensors are upscaled and set not to operate...
  2. I suggest you talk to Hemi tuner he is brilliant...

    I suggest you talk to Hemi tuner he is brilliant with the zf8
  3. Replies
    8
    Views
    2,012

    shift schedule wise yes you can, however you...

    shift schedule wise yes you can, however you can't change which tcc it decides to use , in my GC 2016 zf8 its usually 0 to 10 and 11 to 18 tcc maps
    But you can change the tcc operation as...
  4. Replies
    9
    Views
    700

    I went away from OL tuning preferring to use the...

    I went away from OL tuning preferring to use the NN approach instead but I did have my jeep running well OL . from memory you can rescale the axis so as to have more detail in the area in question ,...
  5. Replies
    12
    Views
    1,805

    Do you know someone who can help with this...

    Do you know someone who can help with this problem? I have been battling with it for ages
    I have made changes to tq parameters so far that has not helped me so no doubt I need some help
    My car...
  6. Replies
    12
    Views
    1,805

    Hi, I have been having a similar problem which...

    Hi,
    I have been having a similar problem which has defeated me for 2 years so far I have mad zero progress on it, It does not seem to be TCC related as I have mine locked up quite low and the...
  7. Replies
    26
    Views
    6,711

    Interesting thread I ran my GC srt8 2016 With NN...

    Interesting thread
    I ran my GC srt8 2016 With NN off. It took a while to get it right , Had to rewrite the EX camshaft map then the VE tables and PE tables worked effectively. .
    I now run...
  8. I logged Long and short term Knock. , so I could...

    I logged Long and short term Knock. , so I could see what it was doing
    If the car logs long term KNK as it will when its cold it will keep pulling timing every time its in that area , until it...
  9. Sorry I haven't been here for a while I have been...

    Sorry I haven't been here for a while I have been trying to post a screen shot but not succeeding,
    Under Spark -- Retard -- Short term Knock ---ST Enable temp. then
    Long Term Knock ---- LT...
  10. Another thought based around what I have...

    Another thought based around what I have experienced
    Once I had an issue when it was dropping cyls under boost I configured my logger to see which cyls and it was alternately dropping about 4 of...
  11. Hi ,all following your thread, I have same...

    Hi ,all following your thread,
    I have same pistons in my boosted GC srt8. 2016 , Have had a lot of problems particularly with cold engine ,where the piston rattle would be enough to log short and...
  12. Something I found might help Im using the Mahle...

    Something I found might help
    Im using the Mahle forged pistons and they rattle quite a bit when cold , it disappears once oil temp gets above 90 odd degrees however the car will log long term Knock...
  13. Replies
    16
    Views
    1,229

    There is a low idle box on the idle page may help...

    There is a low idle box on the idle page may help to adj that up to 650 or whatever the car wants ?
  14. Replies
    2
    Views
    534

    Hi , Im using those inj on my 6.4 gc srt8 the...

    Hi , Im using those inj on my 6.4 gc srt8 the data is available on the deutschworks site
  15. Replies
    14
    Views
    1,226

    PS it does it 2>3 upshift mostly and these shift...

    PS it does it 2>3 upshift mostly and these shift numbers are not close
  16. Replies
    14
    Views
    1,226

    Sorry I have been busy so bit slow to reply, !! ...

    Sorry I have been busy so bit slow to reply, !!

    Thanks for looking !! I will have a look at that ,
    You will probably have seen I have overwritten all the aggression 0 and 1 maps..

    What gets me...
  17. Replies
    14
    Views
    1,226

    Ok Yes does have more tq ,, procharger F1a 12+...

    Ok
    Yes does have more tq ,, procharger F1a 12+ psi max


    However when it does delay it does not feel like its slipping and is above lock up by quite a bit ,,That has been an approach Ive ...
  18. Replies
    14
    Views
    1,226

    Normal mode , I will have a look see if I have a...

    Normal mode , I will have a look see if I have a good log that shows it
    Nige
  19. Replies
    14
    Views
    1,226

    84449 Hi ,HT Thank you for your reply I...

    84449

    Hi ,HT

    Thank you for your reply
    I hope the tune appears above , Have not done this before and Im a little unsure of whats req
    the odd behaviour 2/3 shift happens on flat road and to a...
  20. Replies
    7
    Views
    1,149

    Just a thought ,I had a sim problem with large...

    Just a thought ,I had a sim problem with large throttle reductions between shifts , at the time it was with Neural net disabled
    I remember disabling all the communications under TQ management/...
  21. Replies
    14
    Views
    1,226

    random delayed 2nd to 3rd shift

    Jeep GC 2016 srt8
    zf8spd

    I have a random delayed 2nd to 3rd shift , generally after coming to rest say at a light .
    Its more evident when cold but will still arise randomly when at normal...
  22. Replies
    20
    Views
    1,844

    Jas The latest beta fixed the esp problem and...

    Jas
    The latest beta fixed the esp problem and its associated behaviour so thanks to them its good now !
  23. Replies
    20
    Views
    1,844

    recurrent esp light with jeep reflash

    Hi Jase,
    No codes come up under the PCM or TCM with either the HP of on the cars inbuilt code access , the only code is in the antilock braking system and it says fault
    C1082-02 which is vacuum...
  24. Replies
    20
    Views
    1,844

    Jay I have had the same experience its working...

    Jay
    I have had the same experience its working as it should ..
    However Mines boosted and currently I have a esp light that comes up when it gets significant boost probably 5 psi up , then there is...
  25. Replies
    20
    Views
    1,844

    Hi Jas , I had the same result with the latest...

    Hi Jas , I had the same result with the latest beta loaded ok ,
    But I still have a esp light that comes up when it gets boost , something is still wrong it seems
    Have you any experience with this...
Results 1 to 25 of 49
Page 1 of 2 1 2