dont know if anyone can help me,,, its a 95 c1500, with l86 cam 8speed, stall, im having issues with ecm,tcm not seen brakes applied, installed corvette 3 wire brake switch using pins 68,48,47, also...
Type: Posts; User: Rtex15
dont know if anyone can help me,,, its a 95 c1500, with l86 cam 8speed, stall, im having issues with ecm,tcm not seen brakes applied, installed corvette 3 wire brake switch using pins 68,48,47, also...
On 93,, gonna replace the stock fuel regulator with an after market one see if that helps,, also could it be wrong injector data?
i scaled the injectors by 20 percent and the ve table, this seemed to help alot but now my injector duty cycle get s around 98 percent, could it be not enough fuel, it has one walbro 450 in the tank,...
i was able to do a log, and yes the code p0068 comes on. how would i be able to fix that
let me try that, ill let ya know thanks
thats the thing it doesnt pop a code the only codes is for maf failed wich is speed density
ill try to get a log later today, truck runs good up to the point of getting reduce engine power
yes ve only and 3bar map sensor, and os is 3bar,
04 silverado, turbo truck has 80lb deka injectors, trying to dial in wot and as soon as i i go over 50percent throttle the reduce engine power comes on with no codes, im posting the tune see if...
But if it was a limitation,, wouldn't it do it in regular drive as well,, it only shift early in sports mode,, I copied the normal tables to pattern b, and it still shift early only 3rd and up
2013 camaro shifting early in sports mode, 3rd, 4th and 5th gear,, 1st and second shift on point,, i have it set at 6850rpms. but it shifts at 6200rpms. any one had this issue, in the drive it shift...
Update ended up been evap canister was cloged ,,, with car off I started unpluging evap purge, tank vent solenoid and as soon as I removed the canister hose, pressure started dropping, replaced with...
2010 camaro after switching to 80lb injectors, car drives good and all,, but once the car is turned off for more then 5 min fuel pressure increases to 80psi and car wont start, if u release pressure...
I'm having same issue no pedal in gear.. what was your fix swapping the ecm with new one? The only code I'm getting is fuel pressure sensor a. And p16e4..I swapped pin d and f.on pedal sensor and I...
Is their any support for the t93 tcm can it be unlock? Working on a 2020 camaro and it has the t93
I have a 2018 impala trying to figure out what parameter do i need to set for spark advance and knock retard,, on the timing table on the tune is set rpms and spark airmass,, cant find spark airmass...
Solved issue..ended up been the fuel module replaced it. Fixed the sputtering truck runs good now..
im actually out of town at the moment,,but im posting the tune file. On this file i have the cts injector info and interpolate the injector flow rate as well as the offset vs press vs ign,, when i...
I finally had chance to mess with the truck..still having issues..and I wanna say is the Injector data not right.heres the setup..is a n/a build 6.0 cam with a ls3 intake manifold e85 .and lsa...
Does anyone have good data for lsa injector for a 07 silverado with e38 ecm?
no its a 3600 triple disk on a 6l80e
ok question here, on torque converter lock ups, is it better to have it lock in a certain speed at wot,, or leave it unlock at wot? notice that leaving it unlock rpms stay high when shifting...
thats what ima end up doing..just wanted the 6.2 file so i wouldnt have transfer all the tables over. thanks
Just tried it still not compatible only the trans is,, I can do segment swap from 5.3 to 5.3 same yr,, but some reason not a 6.2 on this yr,, the engine operation id on this file is 12665174,,...
6 speed