Search:

Type: Posts; User: vettemakesemwet

Page 1 of 4 1 2 3 4

Search: Search took 0.00 seconds; generated 51 minute(s) ago.

  1. Replies
    11
    Views
    459

    Car is set up to run "dynamic", meaning SD and...

    Car is set up to run "dynamic", meaning SD and MAF. I started with VE tuning and got it in line. Keep in mind mine is stock. After VE/SD, I tuned the MAF. Think I need a couple more runs on MAF...
  2. Replies
    9
    Views
    422

    2nd what Nutty said. You added "super squirter"...

    2nd what Nutty said. You added "super squirter" injectors, a big ass cam, and bored it over. This is no longer a 6.0. Those variables will need to be programmed in as well. What you have right now is...
  3. Replies
    11
    Views
    459

    Fisrt, take the fuel back to 10% over. If still...

    Fisrt, take the fuel back to 10% over. If still too rich, take it to 5% over stock. Rinse and repeat. You're beyond pig rich. That is where I would start.

    My first start with my stock z06 after...
  4. Replies
    13
    Views
    435

    It is as simple as splicing 3-4 wires with the...

    It is as simple as splicing 3-4 wires with the 4110. I went full nerd and made a harness for mine. Tuning is aftermarket. Anything you add to the car is aftermarket. Anytime something that is added...
  5. Replies
    13
    Views
    435

    5FDP, please feel free to point out any issues...

    5FDP, please feel free to point out any issues with this method. I am using it to log, and it seems to work, but I am always open to suggestions, and would prefer to be corrected than spread bad...
  6. Replies
    13
    Views
    435

    First I would say post a tune and maybe a log....

    First I would say post a tune and maybe a log. Only having one sensor on a factory tune with that setup makes it stay in open loop. That is one thing. Second, you modified the way it breaths, doesn't...
  7. Is there something in the IAC controls for a...

    Is there something in the IAC controls for a transition you could tweak? SFrom the log, it looks like when it tries to die, then it catches itself and idle surges up and down a tiny bit?. That an...
  8. Replies
    5
    Views
    174

    Innovate sells the DB gauge by itself. ...

    Innovate sells the DB gauge by itself. https://www.innovatemotorsports.com/products/db.php

    From what I found, you need to connect the "program cable" to the laptop, and there you change to lambda...
  9. I'll throw a ditto out on the wideband. Wired up...

    I'll throw a ditto out on the wideband. Wired up the serial, got a serial RS232 to usb adapter, and it read perfectly in the scanner from the first try. All I had to do was add it to the PID list....
  10. C5 Corvette wideband issue(s), read issues

    Installed a wideband, AEM 30-4110 in my Z06. Put it in the upstream bung for tuning. Stock exhaust. It starts out reading fine, but eventually goes to full lean, on both gauge and scanner. Does this...
  11. Replies
    24
    Views
    5,025

    It is not "dyno exact", however not all dynos are...

    It is not "dyno exact", however not all dynos are the same either. It is fairly close. With that calculation, you are getting BHP(HP at the crankshaft. ([50108.127]*[50070.56]/5373 *.8 This would be...
  12. Oh yeah, make sure there are no vacuum leaks. On...

    Oh yeah, make sure there are no vacuum leaks. On stock LS/vortec engines, high fuel trims at idle and while driving, points towards un-metered air entering, the air measurement device has been...
  13. Ford expidition, mid to late 2,000's model....

    Ford expidition, mid to late 2,000's model. Customer complaint of sometimes a long crank/hard start. No codes, no PID out of range, NOTHING. COuld not duplicate. Did everything except put it in a...
  14. Replies
    12
    Views
    489

    That's funny, because if the actual torque...

    That's funny, because if the actual torque reduction amount is set to zero, I would think the duration is a moot point. Guess not. That's good to know.

    I have found myself using my HP tuners as a...
  15. Replies
    7
    Views
    222

    I'm not really into spray, but it is essentially...

    I'm not really into spray, but it is essentially a chemical supercharger. Not an expert, but think with that big of a shot you need bigger injectors. More air, more fuel needed. If the injectors are...
  16. Replies
    12
    Views
    489

    Torque management is taking over the throttle...

    Torque management is taking over the throttle body. I'm not an expert by any means. On all honesty, I am an amateur tuner at best. I am however a pretty good diagnostician by trade(I figure shit out...
  17. Replies
    12
    Views
    489

    APP is Accelerator Pedal Position. Since you have...

    APP is Accelerator Pedal Position. Since you have a drive by wire(DBW), there is no cable connecting the throttle pedal to the throttle body. I'll look at the log and see what I can see.
  18. Looks like the misfire monitor is disabled.

    Looks like the misfire monitor is disabled.
  19. Replies
    12
    Views
    489

    Do you have a PID for throttle control source?...

    Do you have a PID for throttle control source? Same as last log, the APP was reading high, TPS not following. Something is keeping the TB from opening. Does the dash display reduced engine power when...
  20. Replies
    12
    Views
    489

    The log is also missing some other info. Timing...

    The log is also missing some other info. Timing logging is a must. Your APP is registering, what is controlling the TB? Get a more detailed log. Wideband input?
  21. Killed the CAGS on my vette and the reverse...

    Killed the CAGS on my vette and the reverse lockout went bonkers for a bit. Glad I was paying attention. Thought it was weird enough to share here.
  22. Fix the electrical issues first. What are the...

    Fix the electrical issues first. What are the electrical issues? Post a tune and any mods to the engine/trans besides the swap. I hate Jeeps, but this sounds cool. lol
  23. Do you have a wideband set up? You'll need that...

    Do you have a wideband set up? You'll need that too. When you get your dongle, post a tune file and hopefully someone can help you.
  24. You said you have ETB, I decipher that as...

    You said you have ETB, I decipher that as Electronic Throttle Body. Please correct me if I am wrong. If this is DBW/ETB, you should log your accelerator position sensor as well, make sure it is not...
  25. Magic eight ball says you're f****d. Do you mean...

    Magic eight ball says you're f****d. Do you mean pin 16 of the obd port, typically reserved for B+ voltage to power scan tools and the like? Magic eight ball asks for more information. Snap on midget...
Results 1 to 25 of 87
Page 1 of 4 1 2 3 4