im seeing all these comments a day late. I ended up throwing my best tune back in yesterday . this is where i had VE and MAF tuned where the engine ran best and made the most power i will share the...
Type: Posts; User: peterjo96
im seeing all these comments a day late. I ended up throwing my best tune back in yesterday . this is where i had VE and MAF tuned where the engine ran best and made the most power i will share the...
MY tune i shared with GHuggins this morning is the best one that i have. the engine runs the best the way it is untill i turn everything back on, then its like i didnt even tune it
My data logged changes to VE table in editor made no changes after 3 test even with the p0103 on, something is stopping my changes to VE from actually making the engine run differently (unless unplug...
So heres what i got man, i got my 103 ive been looking for, I was interested in your changes from mine so i went through all tabs what stuck out to me the most was what you changed in the engine diag...
WILL DO!!!! I will let you know what we are looking like here shortly. I want to thank everyone for there help also i appreciate it!
I must Have not saved the file prior to turning those things back on but i promise i know i had them turned off while sd tuning. I put my frequency to 1, turned my p0101-103 to first error, dynamic...
I did not adjust every hit cell individually i copied sections where it told me the afr +,- was and pasted into my VE table MULT BY % obviously i made sure my chart didnt have large spikes, tried to...
I tried to tune it with out unplugging the MAF but my copy and paste % will move my chart up or down for whatever its calling for but not make any changes to AFR or the way the engine runs. say it...
Im having a hard time with this and need some insight.
tuned idle, Tuned VE, Tuned MAF ran great all individually
VE- Attempted to fail MAF as suggested, MAF fail freq high=0,P0101-P0103 mil on...
something like a 2800?
working with a ls1 with a mild cam paired up to a 4L60E with a 2200 stall.
Having issues with it Dying when i put it in gear or loosing to much rpm putting into gear (idles at 950, shift, drops to...
Tuned the MAF and VE tables, Everything looked good had trims within 3% in both tables figured id move to torque management things, so I turned everything back on stft/open loop and now its super...
thank you I ended up figuring out I had something wrong in the histograms, I finished up VE table and ran great, moved onto MAF and it runs like garbage while dynamic airflow is disabled made a...
A p59
could someone help me out here please, Ive been trying to tune the maf and ve tables and after datalogging and making changes to tables I proceed to get the same information time after time,...
could someone help me out here please, Ive been trying to tune the maf and ve tables and after datalogging and making changes to tables I proceed to get the same information time after time,...