Search:

If you're going to disable TCC lockup, do it in the apply/release tab. set apply to 318 and release to 317. But i do not advise it in all gears. I would keep TCC lockup in 7th & 8th at a minimum....

I wouldn't touch the inertia tables at all. GM did a pretty damn good job with those. I always start with shift timing and possibly adjust the pressures up to +20% on a stock trans with a stock TCC....

Try this file. I made a few adjustments to your tune. 143651

I would also recommend you disable DOD in the ECM.

Try this file. I made some basic changes to your file. 143607

130478

I have a silly question? I am new to HP Tuners, and I was wondering in this photo is it saying that Pattern A is normal mode when the transmission is put into drive and Pattern B is...

I didn't think of it that way, makes sense. I was just trying to get more exposure and hopefully some more thought. Thanks for the advice pal.

5FDP……. I was looking for advice seeing how I am new to HP Tuners. No reason to feed into blindsquirrel’s BS. Thanks for your advice for the new guy!!

1. You don?t think there are guys in the gen III and gen IV groups that are not knowledgeable about gen V tuning?
2. The reason I posted it it the transmission group was to get help/advice about the...

Hey guys, I wanted to ask and see if someone would mind taking a look at this new tune I did for E85 and see if anything seems off or way out of line. This is the first E85 tune I have ever done....

Yeah, that's ironic for sure lol ;)

Thanks for the info. I will keep that in mind. It usually doesn't get that cold here in the winters. Not for long anyway. I would say our average low temperature here in the winter is 28 - 32 degrees.

Which direction would you go with the cranking ignition timing for ethanol? And as far as the torque model, it will also be different for ethanol opposed to 93 gas?

Thanks pal. Upon comparing the two files I see now what you are saying. I will make adjustments to those as needed. Thank you for your time and input. Like I said I am new to this and learning as I...

Excuse my ignorance here, but I am new to all this and I'm not sure I am following all you are saying pal. Thank you for your advice and input though. Do you care to elaborate on this more for me...

Hey guys, I wanted to ask and see if someone would mind taking a look at this new tune I did for E85 and see if anything seems off or way out of line. This is the first E85 tune I have ever done....

Hey guys, I wanted to ask and see if someone would mind taking a look at this new tune I did for E85 and see if anything seems off or way out of line. This is the first E85 tune I have ever done....

Hey guys, I wanted to ask and see if someone would mind taking a look at this new tune I did for E85 and see if anything seems off or way out of line. This is the first E85 tune I have ever done....

Thanks pal.

Can you email me this video please?

[email protected]

That link doesn't work. Matter of fact none of the links I have found work.

Thank you

Where do I find the BlueCat tool?

Okay guys I just recently purchased HP tuners with the intention of adjusting my TCM for the new 3200 stall convertor. Any suggestions and guidance would be greatly appreciated. I just don't want to...