misk, that was probably my video of my 2010 FG with abs module disconnected everything worked as normal, as it uses the internal ZF speed source for the pcm which feeds the cluster etc.
Type: Posts; User: PCS
misk, that was probably my video of my 2010 FG with abs module disconnected everything worked as normal, as it uses the internal ZF speed source for the pcm which feeds the cluster etc.
ok thanks, yeah i can get low speed to come on but no signal change from pin 56 for high speed when i test in the scanner
std tune is attached
it is set for 2 discrete fans std, but i can only activate low speed output from the scanner (fan1) and cant get the hi speed output to come on at all.
i know some of the usa...
hi,
has anyone played around with fan outputs on VZ ls2 E40 ecus, im not able to activate fan2 output on the ecu, and not sure if its setup for recirc or fan as HPT doesnt show the setting like it...
probably would have been worth pulling the plugs out and taking a look, that would show you if there are any significant flow differences between the 6
hi julian, im interested in what you did to resolve this or if you can do a read and post it up as im having the same issue with driveline out of a VE
I have looked into it a little more, seems it downshifts from 6>5 and then upshift 5>6 every 4 and 6 seconds..... any ideas???
Hi all,
I have setup an L98 and 6l80e from a VE into a customers vehicle and we are having the issue of the trans downshifting from 6>5 when cruising at around 90-100 kph if you slightly come off...
ok, solved the issue, in the end it was the vacuum hose to the brake booster (which is under the drivers floor on this vehicle) was damaged and sucking air in, fixing this brought the idle fuel...
thanks jime, ok i will look more into it on monday. one other thing is the maf has also been relocated and not sure if the current location might have an effect on airflow through it (its in an S...
hi all
just got an engine running in a different vehicle than it origianlly came from and has longer headers with the o2 sensors about 3/4 of the way down the transmission.
L98 6.0L and E38 ECU, ...
FYI I have a 2009 FG G6ET with ZF 6 Speed and just went and did some testing. Tune is basically stock just with some boost and timing changes, no other parameter changes. I just disconnected the abs...