Out of all the tables 14 is the only one that is different. every other table on the torque calculation are identical to each other but they are all different from the stock tables.
I expected all...
Type: Posts; User: Craig J
Out of all the tables 14 is the only one that is different. every other table on the torque calculation are identical to each other but they are all different from the stock tables.
I expected all...
In mapped points config it is setup to only use mapped point 14.
This is the stock edelbrock tune.
The other tune is the same.
I know Roush use 14-25 i think and stock 0-25.
Just been out for a drive and took a log.
wasn't as bad today but it is the first time driving it since going to the VMP AIT sensor.
Normally it feels like you have been shunted as you go back on...
No problem.
Edelbrock vmp 93 is on the car right now but the 618 will be going back on once the BAP arrives.
no logs right now but could get on tomorrow.
89138
89139
Has any one had this issue?
Car is a 16 Mustang manual with Edelbrock 2300 supercharger.
When on the power up in the revs its great but low down normal driving it can be quite a pain due to...