updated my software from old 2011 version to current update. TAA DAAAAAAH, it works now. I never bothered to update it before because it worked just fine and never had an issue. Maybe when the cable...
Type: Posts; User: MBC Racing
updated my software from old 2011 version to current update. TAA DAAAAAAH, it works now. I never bothered to update it before because it worked just fine and never had an issue. Maybe when the cable...
Tuner said they will put the old VIN back in the PCM. VIN that was in the PCM was a auto trans VIN, VIN of car is for a manual trans. Right now the VIN in the PCM will say the car is a manual when it...
ok, will do.
thanks
I shut the computer down between attempts. But no, I didn't do a "Clear last Vehicle". Is that still required even if I shut down. Never had to do anything like that before.
thanks
My 00' Camaro is licensed to my cable and I have used it may times to adjust various parameters.
VIN in PCM "was" the VIN from my other Camaro and I never changed it to match the body it was now in...
I'm not sure what is going on but here are the details
Have logged and tuned with this cable on my truck multiple times.-no problems
Took to have dyno tuned, my cable was used but tuners laptop....
Is it possible to get 14.7 out of a big cam like this if measuring with a wideband in the collector of the header?
Cool. I will have to give it a try over the weekend.
thank you
i'll attach the tune when I get home. I was able to push the IAC value up and down based off of timing at idle. Didn't look to see what it was at cranking.
I am modifying a "Professional" tune that...
Please forgive the newb question, but could you please elaborate on this?
thank you
Tried searching and either I'm not looking in the right place or ..........
I am trying to get my car to start better with the big cam it has. Right now I have it set so the TB blade is open as...
haven't touched the car since my original post......:(
finally got some time to get out there and read out the tune so I could post it up. Here it is. Please let me know if you have any...
Thanks for the info. I am not seeing this code when I use the cheap code reader I have in the car. I will look into it further tonight.
Also, today it got stuck in 4th on the highway with the...
***Added tune below**
I will post my tune when I get home later today. Sometimes, my trans will not down shift on the highway. Today, I was cruising at 70 mph, floored it and the converter stayed...
A couple other tuners have given me similar advice. I still have a good couple hours of work hooking up everything before I fire it up. I just got the motor back in the car the other day.
ok, thank you. i will mess with them and see what happens.
Thanks for the info.
On the brighter side..... I joined the Racetronix forum and was able to access the complete flow data for the injectors. Its not puplicly posted and you have to be a customer...
Is the info provided on the injectors enough to correctly populate the tables in HP tuners? Is there an excell file or something that I can imput the data and it will generate a copy and paste chart?...
I looked at the injectors this morning. I found the following numbers:
0892
0872
01D030B
I am assuming the last number is the part number?
the data from when I purchased them is:
Static...
The data on mine says they are manufactured by SMP.
Searched under that and got nothing either......
Thanks
i decided to try the info I found from this post:
http://www.hptuners.com/forum/showthread.php?t=17362
Could Eagle or EC Tune please respond if the Lucas 42 you reference are the same as what i...
I have spent the last 3 hours searching the web for this!!!:banghead:
I just finished putting my engine back together and plan to put the new combo in the car tomorrow. I really want to set the...
I recently bougt a 00 C5 and now has the service column lock message and Remove key, wait for 10 seconds message.... Car already had the GM recall fix done to it, but am wondering if HP tuners has a...
I have searched and either am looking for the wrong words or just can't find anything...:banghead:
My car has the column lock bypass done to it. However, I am getting the remove key wait for 10...
Thanks for the info. I will try it. Which of my tunes are your refering to..... the 1st one or the 2nd? The 1st one is what is in my truck now and feel decent. The second one didn't feel good at all...