Everything but the way the bag inserts is ok. It hits the casting and can't be modified. Would also have to get a Malibu horn/bag pad.
Type: Posts; User: HGT
Everything but the way the bag inserts is ok. It hits the casting and can't be modified. Would also have to get a Malibu horn/bag pad.
Damn... 10-12 Malibu does not fit an 08 cobalt. Still looking.
72143
72144
Mine was chewed up on top and the rest of the interior has been replaced with new or redone..... Figured I had better get a new one before I can't.
I contemplated a new steering wheel with the paddle shifters but just couldn't get myself to do it. If we had that Go-Cart 90 degree lock to lock radius it may work but boy would that be a difficult...
2008 Sport
I know this is really old but does anyone know if this can be selected from the shifter with some work? I need 4 ranges to do this and don't want to put in a different shifter.
71689
These were my OEM shift times and pressures.
71671
71672
I haven't really been able to use anyone's tunes etc. as I am at 6200' ASL. I looked at the HHR trans settings but still had to find my...
That's where it needed to be although anything above 200 ft lb I am needing firm shifts. As we have found out, the calculated torque isn't exact at all nor when it occurs. I had my shift times and...
It would be better if I looked at his times and pressures then if he copied my Supercharged 2.4L at 6200' ASL. data.
My tune is already public on HP Tuners site.
71404
71405
Post your Pattern X shift times and pressures. I have a great daily driver shift vs WOT shift
Thanks for validating the I and L experience. I was told there wasn't a difference yet there is in my experience also. I go through a lot of fuel finding what has what affect and don't like doing WOT...
No one?
Can anyone point me to where I can find this info?
Being a GM engineer / Dealer trainer for over 20 years, I understand the platforms, devices, etc What I need help with is how some of the HP Tuner nomenclature applies to the 4T45E in the Chevy...
Colson
Are you referring to this step?
68084
B.Roid
Do you still have that brass fitting? Is it machined all the way through?