Search:

Hey guys,

This is something that has been niggling me for the last 4 years. I have a 2016 2500HD with an E78 ECU. Since new, it has had a random flatspot just before 2000rpm. The wost it has ever...

OK that makes sense.

When I go into the OS section it only shows a 2 bar SD OS. I believe I have to change my MAP sensor to match?

I've just noticed that I didn't change the manifold volume under the speed density tab. The Z06 had a volume of 11,340 and the camaro 9,590. Being 15% smaller I guess this will contribute to the...

Yup that will do it :doh:!

Thank you

I'll let you know tomorrow... hopefully. Assuming I can get the rest of the car back together first!

I did find that the Adafruit M0s have a dedicated DAC on A0. It's only 0-3.3V but you may be...

OK I found the dynamic airflow enable/disable too. For some reason on my other computer (opening the same file) I see a lot less tables. Need to remember that in future!

Thank you. Correcting the injector tables ASAP.

Hey lukearmstrong1990,

Appreciate you taking a look. I thought MAF fail mode was the way to force a Gen3 PCM into SD? Have I misunderstood something or done something incorrectly?

Have I missed...

What wide band are you using and how is it connected? I've learnt recently that some wide bands have an output incompatible with the analog input on the logger. If the data on the logger is jumping...

To clarify my actual questions :)

1. Are there any updated spreadsheets that would include the injectors from a 2010 Camaro SS that would allow me to enter the correct parameters to the 2006 ECU?...

Nice! I tested the analog out on a scope and saw the PWM. I also tried the DAC out and it?s impressive! I?ll get it hooked up ready for the dyno Friday. The capacitor worked but it will likely...

Hey guys,

81516

I have a 2006 Z06 ECU running basically a 2010 Camaro 6.2L LS3 block. It has headers and an intake. I've run it a few times and have had hesitation issues that I'm trying to...

Interesting. Any idea what type of ADC they use internally? Is there any other way to fix? I was worried about any delay that it would introduce.

I was going to suggest a DAC and found the...

It would have been an SS. It's a complicated story but I purchase the intake that had the stock injectors and rail for a race car build.

To further complicate matters I'm running the ECU from a...

Not on the MXG :( The LCU-One controller also doesn't have a 0-5V out (the CAN version). Turns out they had another version that has CAN+Analog. Had to end up buying that. The CAN isn't working (not...

Hey all,

In the sticky there is a link to an injector spreadsheet but it doesn't work for me. Am I doing something wrong?

I searched around using the name on this site and good. There's another...

Hey All,

I've searched the forums and google but can't see any reference to these particular Lambda controllers.

I have an AIM dash with a couple of LCU-One Lambda controllers connected over...

Just thought I'd say hi. Converted across to Chevy and looking forward to getting into tuning :) I have a couple of V8s right now that I'm trying to learn all about before I delve in!