Anyone randomly get p906da codes. Plenty of fresh oil, oil pressure reads fine checked all wires. Can clear code but will come back on after reaching 2500rpm. Will either say oil pressure sensor...
Type: Posts; User: whippled l83
Anyone randomly get p906da codes. Plenty of fresh oil, oil pressure reads fine checked all wires. Can clear code but will come back on after reaching 2500rpm. Will either say oil pressure sensor...
here is current tune and closed loop log if anyone can give insight.
After getting maf and vve dialed in at light throttle cruising to pass or up hill. I'm getting 2-6*KR with 5-10*spark advance then IPW from 5-6ms. I've been adjusting SOI and EOI slowly which has...
You'll need a 2bar map
I used blue cat Trans tool. Made Trans feel much smoother and handles added power a lot better
Only thing I haven't touch up on so far is SOI and EOI tables otherwise afr is within+- .05 both maf and vve tables. I've had no knock other than when the exhaust got a leak. Trans I used blue cat...
Would you have a preference on AEM or Snow meth kits for quality and reliability?
Opinions on going with l86 injectors or just adding meth injection to get truck to 600hp?
Mine does that as well. I added wb equipment ratio 1 I believe in channels and it reads what my gauge reads.
I also keep getting a throttle pedal performance mill at random times and not sure why.
How do you filter knock from boost and actual knock when logging for timing?
I got wideband on and maf dialed in within +- .5 from lamba. Go to do speed density and truck barely stays running. Is this normal?
Did you have any clearance issues with lt4 hpfp under the whipple?
L83 and l86 have same hpfp but l86 has extra 20ish lbs. I've been looking at lt4 setup just heard a lot of clearance issues with lt4 hpfp under whipple
After the cam, heads, headers I was told it's only using 20% of fueling. That's why I started researching tuning and now will be finishing the build myself
It is stock fuel system. He tuned it after the cam,heads, long tubes and said there's plenty of fuel system left for the Whipple. Final dyno was 438hp 450ftlb. Which I know is low for the build. My...
Ive got a 2018 l83. Just installed btr stage 2 cam, gpi worked the heads, tsp long tube headers, whipple 2.9l, and soler lt5 ported tb. Had truck tuned by only tuner within 2 hours drive. He did...