Search:

Type: Posts; User: JaegerWrenching

Page 1 of 3 1 2 3

Search: Search took 0.00 seconds.

  1. HP won't be able to do this without user defined...

    HP won't be able to do this without user defined parameters. So You'll need a delete tune "your best and easiest bet" or know where and how to turn off these codes in the binary file.
  2. Heck yeah always nice to see the impossible done...

    Heck yeah always nice to see the impossible done haha! Thanks for sharing and furthering the progression.
  3. Replies
    1
    Views
    97

    There's lots of good info on here, especially for...

    There's lots of good info on here, especially for GM/dodge stuff IMO. Ford unfortunately not so much. Look through old posts and take your time. But also play with your truck, it's the best way to...
  4. Nice, did you achieve that using HPT? Also what...

    Nice, did you achieve that using HPT? Also what logging software is that?
  5. Post your tune so we can look at it and see...

    Post your tune so we can look at it and see what's wrong.
  6. Replies
    2
    Views
    141

    There are lots of decent tunes on this forum. I'd...

    There are lots of decent tunes on this forum. I'd suggest going through the page and looking/comparing your file to others and see what they are changing and try to understand why they'd make those...
  7. Replies
    13
    Views
    3,306

    This post is old so i highly doubt you'll get a...

    This post is old so i highly doubt you'll get a response but, you can add 10% by selecting the area you want to add to and put 1.1 in the box then hit X or multiply. 20% would be 1.2 and 15% would be...
  8. Replies
    5
    Views
    159

    If you change that and it still idles high you...

    If you change that and it still idles high you probably have a mechanical issue. If it it fixes it it's probably tune related. I will say being able to view your tune with a data log would make it go...
  9. Update i got it figured out. I had changed the tq...

    Update i got it figured out. I had changed the tq tables level 1 and 2 allowed difference, and torque level 2 offset prior and had an issue with them sending the truck into what i believe to be mono...
  10. Sadly no that's only achievable with forescan....

    Sadly no that's only achievable with forescan. But you can't just "turn on" a oil life monitor. You can view that data on a PC by using HP or forscan but there isn't a screen that i know of to turn...
  11. Replies
    5
    Views
    159

    Post your tune so people can help you.

    Post your tune so people can help you.
  12. Replies
    5
    Views
    448

    Here ya go, Try this, but don't tow with it until...

    Here ya go, Try this, but don't tow with it until you know what EGT's do while under constant load! Daily driving it's fine probably even for towing but i can't guarantee that. Your Timing is going...
  13. Which torque tables are you referring to?...

    Which torque tables are you referring to? Indicated engine torque tables?
  14. Replies
    10
    Views
    442

    Smart man and smart choice! it'll start making...

    Smart man and smart choice! it'll start making sense with research and time, but sometimes making some small changes and logging them will help you understand what they do and how they work. Just...
  15. Replies
    32
    Views
    12,253

    His post is from 2010, you're a little late to...

    His post is from 2010, you're a little late to the party!
  16. Replies
    5
    Views
    448

    Looks fine, that's a small amount of fuel change...

    Looks fine, that's a small amount of fuel change in your tq based fuel map IMO, don't be scared to go to 125ish @811tq column so you take advantage of your injector PW increase. Log your PW and see...
  17. Replies
    5
    Views
    448

    what did you use to deleted the truck with?...

    what did you use to deleted the truck with? Looking at the file now.
  18. Replies
    14
    Views
    2,406

    Anyone figure this out? i think i'm having this...

    Anyone figure this out? i think i'm having this issue but my P061A code is shut off, so it just goes into REP and then nothing is on the screen but it's still in REP mode.
  19. Reduced engine power Part throttle 18 6.7

    I'm getting a Reduced engine power while going part throttle, roughly 45% on the pedal. It's seems fine until right before 2900-3000 RPM, have had it happen at lower RPM though. I have logged it and...
  20. What happens when your MAF fails? Trust me i love...

    What happens when your MAF fails? Trust me i love tuning with a MAF i'ts great and EZ but you should fail/turnoff your maf and tune just VE so you're in the ballpark IMO. That way you and get home if...
  21. Replies
    17
    Views
    806

    From my understanding a .bin file is a raw...

    From my understanding a .bin file is a raw download of what's on the ECU and it's displayed in HEX.. In order to help you view the data in Hex you will then need some software like Tunerpro or...
  22. Is there a reason to change anything in the...

    Is there a reason to change anything in the tables? What would making changes to them do? Are there any calculations based off these
  23. Calculated engine TQ tables, what are they?

    89978 I attached a file of the calculated engine tq, my question is what exactly is this? Is this how much tq the engine produces per that fuel mass? What would changing this do or affect? I have an...
  24. Replies
    6
    Views
    380

    I hope Jim P or CKrueg Chime in, both seem to be...

    I hope Jim P or CKrueg Chime in, both seem to be very knowledgeable. From what i've gathered and the little tuning i've done bumping timing slightly and decreasing fuel pressure a little can result...
  25. Replies
    4
    Views
    213

    So would you say 1750Us on 15+ is getting out of...

    So would you say 1750Us on 15+ is getting out of range of the piston's bowl or that's where they start losing fuel pressure? Assuming its out of range of the bowl, that means the bowl would...
Results 1 to 25 of 64
Page 1 of 3 1 2 3